TP-Link T2500G-10MPS, Руководство пользователя

Страница: 106 / 804

Configuration Guide 82
Managing Physical Interfaces Port Mirror Configuration
Egress With this option enabled, the packets sent by the monitored port will be copied to
the monitoring port. By default, it is disabled.
Note:
•
The member port of an LAG cannot be set as a monitoring port or monitored port.
•
A port cannot be set as the monitoring port and monitored port at the same time.
3.2 Using the CLI
Follow these steps to configure Port Mirror.
Step 1 configure
Enter global configuration mode.
Step 2 monitor session session_num destination interface { fastEthernet port | gigabitEthernet
port }
Enable the port mirror function and set the monitoring port.
session_num
: The monitor session number. It can only be specified as 1.
port
: The monitoring port number. You can specify only one monitoring port for the mirror
session.
Step 3 monitor session
session_num
source interface { fastEthernet
port-list
| gigabitEthernet
port-list
| port-channel
port-channel-id
}
mode
Set the monitored ports.
session_num : The monitor session number. It can only be specified as 1.
port-list : List of monitored port. It is multi-optional.
mode : The monitor mode. There are three options: rx , tx and both :
rx : The incoming packets of the monitored port will be copied to the monitoring port.
tx : The outgoing packets of the monitored port will be copied to the monitoring port.
both : Both of the incoming and outgoing packets on monitored port can be copied to the
monitoring port.
Step 4 show monitor session
Verify the Port Mirror configuration.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to copy the received and transmitted packets on port
1/0/1,2,3 to port 1/0/10.
Switch#configure
Switch(config)#monitor session
1 destination interface gigabitEthernet 1/0/10
Switch(config)#monitor session 1 source interface gigabitEthernet 1/0/1-3 both