TP-Link T2500G-10MPS, Руководство пользователя

Страница: 279 / 804

Configuring GVRP GVRP Configuration
Configuration Guide 255
Step 4 gvrp
Enable GVRP on the port.
Step 5 gvrp registration { normal | fixed | forbidden }
Configure the GVRP registration mode for the port.
normal : In this mode, the port can dynamically register and deregister VLANs , and transmit
both dynamic and static VLAN registration information. It is the default mode.
fixed : In this mode, the port is unable to dynamically register and deregister VLANs, and can
transmit only the static VLAN registration information. In Fixed mode, only the static VLAN
the port belongs to is allowed to pass.
forbidden : In this mode, the port is unable to dynamically register and deregister VLANs,
and can transmit only information of VLAN 1. In Forbidden mode, only the default VLAN 1 is
allowed to pass.
Step 6 gvrp timer { leaveall | join | leave }
value
Set the GARP timers according to your needs.
leaveall : When a GARP participant is enabled, the LeaveAll timer is started. When the
LeaveAll timer expires, the GARP participant sends LeaveAll messages to request other
GARP participants to re-register all its attributes.
join : Join timer controls the sending of Join messages. After sending the first Join message,
a participant starts the Join timer. If the participant does not receive any JoinIn message,
it sends the second Join message when the Join timer expires. This ensures that the Join
message can be sent to other participants.
leave : A participant sends a Leave message if one of its attributes is deleted. The participant
receiving the message starts the Leave timer. If the participant does not receive any Join
message of the corresponding attribute before the Leave timer expires, the participant
deregisters the attribute.
value : Set a value for the timer. For LeaveAll timer, the range is 1000 to 30000 centiseconds
and the default is 1000 centiseconds. For Join timer, the range is is 20 to 1000
centiseconds and the default is 20 centiseconds. For Leave timer, the range is is 60 to
3000 centiseconds and the default is 60 centiseconds.
Step 7 show gvrp global
Verify the global configurations of GVRP.
Step 8 show gvrp interface [ fastEthernet
port
| gigabitEthernet
port
| port-channel
port-channel-
id
]
Verify the GVRP configuration of the specified port or LAG.
Step 9 end
Return to privileged EXEC mode.
Step 10 copy running-config startup-config
Save the settings in the configuration file.