Toyota 2VZ-FE, Руководство пользователя

Страница: 103 / 324

SPECIFICATIONS (Cont’d)
Camshaft
(
’d)
Cam lobe height STD Intake 39.510–39.610 mm 1.5555–1.5594 in.
(cont’d)
Exhaust 38.960–39.060 mm 1.5339–1.5378 in.
Limit Intake 39.36 mm 1.5496 in.
Exhaust 38.81 mm 1.5279 in.
Camshaft gear backlash STD 0.020–0.200 mm 0.0008–0.0079 in.
Limit 0.30 mm 0.0188 in.
Camshaft gear spring end free distance 18.2–18.8 mm 0.712–0.740 in.
Timing belt
tensioner Protrusion (from housing end) 10.5–11.5 mm 0.413–0.453 in.
Cylinder
bl
k
Cylinder head surface warpage Limit 0.05 mm 1.0020 in.
y
block
Cylinder bore diameter STD Mark 1 87.500–87.510 mm 3.4449–3.4453 in.
Mark 2 87.510–87.520 mm 3.4453–3.4457 in.
Mark 3 87.520–87.530 mm 3.4457–3.4461 in.
Limit STD 87.73 mm 2.4539 in.
O/S 0.50 88.23 mm 3.4736 in.
Piston and
i i
Piston diameter STD Mark 1 87.445–87.455 mm 3.4427–3.4431 in.
piston ring
Mark 2 87.455–87.465 mm 3.4431–3.4435 in.
g
Mark 3 87.465–87.475 mm 3.4435–3.4439 in.
O/S 0.50 87.945–87.975 mm 3.4624–3.4636 in.
Piston oil clearance STD 0.045–0.065 mm 0.0018–0.0026 in.
Limit 0.085 mm 0.0033 in.
Piston ring groove clearance No.1 0.010–0.080 mm 0.0004–0.0031 in.
No.2 0.030–0.070 mm 0.0012–0.0028 in.
Piston ring end gap STD No.1 0.300–0.540 mm 0.0118–0.0213 in.
No.2 0.350–0.620 mm 0.0138–0.0244 in.
Oil 0.200–0.570 mm 0.0079–0.0224 in.
Limit No.1 1.12 mm 0.0441 in.
No.2 1.20 mm 0.0472 in.
Oil 1.15 mm 0.0453 in.
Connecting
d
Thrust clearance STD 0.150–0.330 mm 0.0059–0.0130 in.
g
rod
Limit 0.38 mm 0.0150 in.
Connecting rod oil clearance
STD STD 0.028–0.065 mm 0.0011–0.0026 in.
U/S 0.25 0.027–0.080 mm 0.0011–0.0031 in.
Limit 0.08 mm 0.0031 in.
Connecting rod bearing center wall thickness
Mark 1 1.484–1.488 mm 0.0584–0.0586 in.
Mark 2 1.488–1.492 mm 0.0586–0.0587 in.
Mark 3 1.492–1.496 mm 0.0587–0.0589 in.
Rod bending per 100 mm (3.94 in.) Limit 0.05 mm 0.0020 in.
Rod twist per 100 mm (3.94 in.) Limit 0.15 mm 0.0059 in.
Connecting rod bolt outer diameter STD 7.860–8.000 mm 0.3094–0.3150 in.
Limit 7.60 mm 0.2992 in.
Crankshaft Thrust clearance STD 0.020–0.220 mm 0.0008–0.0087 in.
Limit 0.30 mm 0.0118 in.
Thrust washer thickness 2.440–2.490 mm 0.0961–0.0980 in.
EM-101
ENGINE MECHANICAL – Service Specifications