Toyota 2VZ-FE, Руководство пользователя

Страница: 104 / 324

SPECIFICATIONS (Cont’d)
Crankshaft
(
’d)
Main journal oil clearance STD STD 0.029–0.056 mm 0.0011–0.0022 in.
(cont’d)
U/S 0.25 0.028–0.080 mm 0.0011–0.0031 in.
Limit 0.08 mm 0.0031 in.
Main journal diameter STD 63.985–64.000 mm 2.5191–2.5197 in.
U/S 0.25 63.745–63.755 mm 2.5096–2.5100 in.
Main bearing center wall thickness Mark 1 1.989–1.992 mm 0.0783–0.0784 in.
Mark 2 1.992–1.995 mm 0.0784–0.0785 in.
Mark 3 1.995–1.998 mm 0.0785–0.0787 in.
Mark 4 1.998–2.001 mm 0.0787–0.0788 in.
Mark 5 2.001–2.004 mm 0.0788–0.0789 in.
Crank pin diameter STD 47.987–48.000 mm 1.8892–1.8898 in.
U/S 0.25 47.745–47.755 mm 1.8797–1.8801 in.
Circle runout Limit 0.06 mm 0.0024 in.
Main journal taper and out–of–round Limit 0.02 mm 0.0008 in.
Crank pin taper and out–of–round Limit 0.02 mm 0.0008 in.
TORQUE SPECIFICATIONS
Part tightened kg–cm ft–lb N
⋅
m
No. 1 idler pulley X Oil pump 350 25 34
No. 2 idler pulley X No. 2 idler pulley bracket 400 29 39
Camshaft timing pulley X Camshaft 1,100 80 108
Crankshaft pulley X Crankshaft 2,500 181 245
Timing belt tensioner X Oil pump 270 20 26
Engine RH mounting bracket X Cylinder block 410 30 39
Cylinder head X Cylinder block 12–sided bolt 1st 350 25 34
2nd Turn 90
°
3rd Turn 90
°
Recessed head bolt 185 13 18
LH engine hanger X LH Cylinder head 380 27 37
Camshaft bearing cap X Cylinder head 160 12 16
Cylinder head cover X Cylinder head 60 52 . in.–lb 5.9
No. 3 timing belt cover X Cylinder head 75 65 . in.–lb 7.4
No. 3 timing belt cover X Cylinder block 75 65 . in.–lb 7.4
Exhaust manifold X Cylinder head 400 29 39
Intake manifold X Cylinder head 180 13 18
No. 2 idler pulley bracket stay X Intake manifold 185 13 18
No. 2 idler pulley bracket stay X No. 2 idler pulley bracket 185 13 18
Water by–pass outlet X Intake manifold 200 14 20
Water outlet X Intake manifold 85 73 . in.–lb 8.3
Air intake chamber X Intake manifold 440 32 43
Air intake chamber stay X Air intake chamber 380 27 37
Air intake chamber stay X Cylinder head 380 27 37
Crossover pipe X Exhaust manifold 400 29 39
Crossover pipe X Cylinder head 350 25 34
Crossover pipe X Cylinder block 350 25 34
EGR valve X Air intake chamber 185 13 18
EM-102
ENGINE MECHANICAL – Service Specifications