Toyota 2001 Land Cruiser Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 82

’01 L/C U (L/O 0008)

78

CAUTION

!

After  inserting  the  tab,  make  sure
the  tab  and  buckle  are  locked
and  that  the  lap  and  shoulder
portions  of  the  belt  are  not
twisted.

!

Do  not  insert  coins,  clips,  etc.  in
the  buckle  as  this  may  prevent
you  from  properly  latching  the
tab  and  buckle.

!

If  the  seat  belt  does  not  function
normally,  it  cannot  protect  your
child  from  injury.  Contact  your
Toyota  dealer  immediately.  Do
not  use  the  seat  until  the  seat
belt  is  fixed.

2. Fully extend the shoulder belt to put it

in the lock mode. When the belt is
then retracted even slightly, it cannot

be extended.

To hold the convertible seat securely,

make sure the belt is in the lock mode

before letting the belt retract.

3. While pressing the convertible seat

firmly against the seat cushion and
seatback, let the shoulder belt retract

as far as it will go to hold the convert-

ible seat securely.

«
...
80
81
82
83
84
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов