Toyota 2001 Land Cruiser Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 70

’01 L/C U (L/O 0008)

66

!

Make  sure  you  have  complied
with  all  installation  instructions
provided  by  the  child  restraint
manufacturer  and  that  the  system
is  properly  secured.

—Child restraint system

A child restraint system for a small

child or baby must itself be properly

restrained on the seat with either the
lap belt or the lap portion of the lap/

shoulder belt. You must carefully con-

sult the manufacturer’s instructions
which accompany the child restraint

system.

To provide proper restraint, use a child
restraint system following the manufactur-

er’s instructions about the appropriate age

and  size  of  the  child  for  the  child  restraint
system.
Install  the  child  restraint  system  correctly
following  the  instructions  provided  by  its

manufacturer. General directions are also

provided under the following illustrations.
The child restraint system should be

installed on the rear seat. According to
accident statistics, the child is safer when

properly restrained in the rear seat than

in the front seat.

CAUTION

«
...
68
69
70
71
72
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов