Toyota 2001 Land Cruiser Скачать руководство пользователя страница 192

Страница: 192 / 288

’01 L/C U (L/O 0008)

188

Rear step bumper

The rear step bumper is for rear end

protection and easier step

−

up loading.

To get on the rear step bumper, use the

shaded area between the arrows in the
illustration.

CAUTION

Do  not  allow  more  than  one  per-
son  to  get  on  the  rear  step  bum-
per  at  a  time.  It  is  designed  for
only  one  person.

Never drive the vehicle with any-
one on the rear step bumper.

Limited

−

slip differential

Some Toyotas are equipped with a lim-

ited

−

slip differential. If one of the rear

wheels begins to spin, the limited

−

slip dif-

ferential is designed to aid traction by

automatically transmitting driving force to

the other rear wheel. If you are not sure
whether your vehicle is equipped with one,

you can ask your Toyota dealer.

CAUTION

Do not start or run the engine while
your vehicle is supported by a jack.

The vehicle could be driven off the

jack and could pose a danger or re-
sult in serious injury.

NOTICE

Use only a spare tire of the same
size, construction and load capacity

as the original tires on your Toyota

because damage to the limited

−

slip

differential could possibly occur with

another tire type.

The vehicle identification number (VIN)

is the legal identifier for your vehicle.
This number is on the left top of the

instrument panel, and can be seen

through the windshield from outside.

This is the primary identification number

for your Toyota. It is used in registering
the ownership of your vehicle.

Your Toyota’s identification—

—Vehicle identification

number

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 192 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: