Toyota 2001 Land Cruiser Скачать руководство пользователя страница 229

Страница: 229 / 288

’01 L/C U (L/O 0008)

225

truck

(c) Towing with sling type truck

NOTICE

Do not tow with sling type truck, ei-
ther from the front or rear. This may

cause body damage.

—Emergency towing

Front

Rear

If towing is necessary, we recommend

you to have it done by your Toyota

dealer or a commercial tow truck ser-
vice.
If towing service is not available in an

emergency, your vehicle may be tempo-

rarily  towed  by  a  cable  or  chain  se-
cured  to  one  of  the  following  parts:
Front:  Front  emergency  towing  hook

Rear: Rear emergency towing hook
Use extreme caution when towing the
vehicle.

A driver must be in the vehicle to steer it

and  operate  the  brakes.
Towing  in  this  manner  may  be  done  only
on  hard

−

surfaced roads for a short dis-

tance and at low speeds. Also, the

wheels, axles, drive train, steering and
brakes must all be in good condition.

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 229 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: