Toyota 2001 Land Cruiser Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 76

’01 L/C U (L/O 0008)

72

CAUTION

!

After  inserting  the  tab,  make  sure
the  tab  and  buckle  are  locked
and  that  the  lap  and  shoulder
portions  of  the  belt  is  not
twisted.

!

Do  not  insert  coins,  clips,  etc.  in
the  buckle  as  this  may  prevent
you  from  properly  latching  the
tab  and  buckle.

!

If  the  seat  belt  does  not  function
normally,  it  cannot  protect  your
child  from  injury.  Contact  your
Toyota  dealer  immediately.  Do
not  use  the  seat  until  the  seat
belt  is  fixed.

2. While pressing the convertible seat

firmly against the seat cushion and
seatback, tighten the lap belt by pulling

its free end to hold the convertible seat

securely.

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

«
...
74
75
76
77
78
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов