Toyota 2001 Land Cruiser Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 45

’01 L/C U (L/O 0008)

41

WHEN  RETURNING  THE  SECOND  SEAT
If  you  cannot  raise  the  seatback  be-
cause  of  the  locked  seat  belt,  do  not

try it hard. Release the lock of the seat
belt in the following way. Push in the

lower front edge of the seatback cush-

ion to slacken the seat belt (1) and let
the seat belt retract a little (2).

CAUTION

When returning seats to their original
position, observe the following in or-

der to prevent personal injury in a

collision or sudden stop:

!

Make  sure  the  seat  is  securely
locked  by  pushing  forward  and
rearward  on  the  top  of  the  seat-
back  and  by  trying  to  pull  up  the
edge  of  the  bottom  cushion.  Fail-
ure  to  do  so  will  prevent  seat
belt  from    operating  properly.

!

Make  sure  the  seat  belts  are  not
twisted  or  caught  under  the  seat
and  are  arranged  in  their  proper
position  and  are  ready  to  use.

—Adjusting third seats

«
...
43
44
45
46
47
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов