Toyota 2001 Land Cruiser Скачать руководство пользователя страница 29

Страница: 29 / 288

’01 L/C U (L/O 0008)

BACK DOOR CHILD

−

PROTECTOR

Move the lock lever to the ”LOCK”
position as shown on the label.

This feature allows you to lock a back
door so it can be opened from the outside

only, not from inside. We recommend us-

ing this feature whenever small children
are in the vehicle.

CAUTION

Before driving, be sure that the back
door is closed and locked, especially

when small children are in the ve-

hicle. Along with the proper use of
seat belts, locking the doors helps

prevent the driver and passengers

from being thrown out from the ve-
hicle during an accident. It also helps

prevent the doors from being opened

unintentionally.

Hood

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-

wise, the hood may open unexpected-

ly while driving and an accident may
occur.

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 29 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: