Toyota 2001 Land Cruiser Скачать руководство пользователя страница 189

Страница: 189 / 288

’01 L/C U (L/O 0008)

185

“ABS” warning light
The light comes on when the ignition

key is turned to the “ON” position. If
the anti

−

lock brake system and the

brake assist system work properly, the

light turns off after a few seconds.
Thereafter, if either of the systems mal-

functions, the light comes on.

When the “ABS” warning light is on (and

the brake system warning light is off), the

anti

−

lock brake system, the brake assist

system, the vehicle skid control system

and/or active traction control system do/

does  not  operate,  but  the  brake  system
still  operates  conventionally.
When  the  “ABS”  warning  light  is  on  (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

If either of the following conditions oc-
curs, this indicates a malfunction some-

where in the parts monitored by the

warning light system. Contact your
Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle  at  a  safe  place  and  contact  your
Toyota  dealer.
In  this  case,  not  only  the  anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

Either of the following conditions may

occur, but do not indicate the malfunc-
tion.

The light may stay on for about 60
seconds after the ignition key is turned

to “ON” position. It is normal if it turns

off after a while.

Depressing the brake pedal repeatedly

may turn on the light. It is normal if it

turns off after a few seconds.

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 189 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: