Toyota 2001 Land Cruiser Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 53

’01 L/C U (L/O 0008)

49

CAUTION

Persons should ride in their seats
properly wearing their seat belts

whenever the vehicle is moving.

Otherwise, they are much more likely
to suffer serious bodily injury or

death in the event of sudden braking

or a collision.
When using the seat belts, observe

the following:

!

Use  the  belt  for  only  one  person
at  a  time.  Do  not  use  a  single
belt  for  two  or  more  people—ev-
en  children.

!

Avoid  reclining  the  seatbacks  too
much.  The  seat  belts  provide
maximum  protection  when  the
seatbacks  are  in  the  upright
position.  (Refer  to  the  seat  ad-
justment  instructions.)

!

Be  careful  not  to  damage  the
belt  webbing  or  hardware.  Take
care  that  they  do  not  get  caught
or  pinched  in  the  seat  or  doors.

!

Inspect  the  belt  system  periodi-
cally.  Check  for  cuts,  fraying,
and  loose  parts.  Damaged  parts
should  be  replaced.  Do  not  dis-
assemble  or  modify  the  system.

!

Keep  the  belts  clean  and  dry.  If
they  need  cleaning,  use  a  mild
soap  solution  or  lukewarm  water.
Never  use  bleach,  dye,  or  abra-
sive  cleaners—they  may  severely
weaken  the  belts.  (See  ”Cleaning
the  interior”  in  Section  5.)

!

Replace  the  belt  assembly  (in-
cluding  bolts)  if  it  has  been  used
in  a  severe  impact.  The  entire
assembly  should  be  replaced
even  if  damage  is  not  obvious.

«
...
51
52
53
54
55
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов