Toyota 2001 Land Cruiser Скачать руководство пользователя страница 201

Страница: 201 / 288

’01 L/C U (L/O 0008)

197

Winter driving tips

Make sure you have a proper freeze

protection of engine coolant.

Your coolant must contain ethylene

−

glycol

type coolant for a proper corrosion

protection of aluminum components. Use

”TOYOTA Long Life Coolant” or equivalent.
See Section 7

−

2 for details about coolant

type selection.

NOTICE

Do not use alcohol type antifreeze or
plain water alone.

When it is extremely cold, we recommend
to use 60% solution for your Toyota, to

provide protection down to about

−

(

−

F). Do not use more than 70% solu-

tion for better coolant performance.

Check the condition of the battery and

cables.

Cold temperatures reduce the capacity of

any battery, so it must be in top shape
to provide enough power for winter start-

ing. Section 7

−

3 tells you how to visually

inspect the battery. Your Toyota dealer
and most service stations will be pleased

to check the level of charge.

Make sure the engine oil viscosity is

suitable for the cold weather.

See Section 7

−

2 for recommended viscos-

ity. Leaving a heavy summer oil in your

vehicle during winter months may cause

harder starting. If you are not sure about
which oil to use, call your Toyota dealer–

he will be pleased to help.

Keep the door locks from freezing.

Squirt lock de

−

icer or glycerine into the

locks to keep them from freezing.

Use a washer fluid containing an anti-

freeze solution.

This product is available at your Toyota

dealer and most auto parts stores. Follow

the manufacturer’s directions for how
much to mix with water.

NOTICE

Do not use engine antifreeze or any
other substitute as washer fluid be-

cause it may damage your vehicle’s

paint.

Do not use your parking brake when

there is a possibility it could freeze.

When parking, put the transmission into
”P” and block the front wheels. Do not

use the parking brake, or snow or water

accumulated in and around the parking
brake mechanism may freeze, making it

hard to release.

Keep ice and snow from accumulating

under the fenders.

Ice and snow built up under your fenders
can make steering difficult. During bad

winter driving, stop and check under the

fenders occasionally.

Depending on where you are driving,

we recommend you carry some emer-
gency equipment.

Some of the things you might put in the
vehicle are tire chains, window scraper,

bag of sand or salt, flares, small shovel,

jumper cables, etc.

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 201 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: