Toyota 2001 Land Cruiser Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 288

Toyota 2001 Land Cruiser Скачать руководство пользователя страница 150

’01 L/C U (L/O 0008)

146

”AUTO” position

For automatic operation of the air condi-

tioning,  turn  the  fan  speed  and  air  flow
selector  knobs  to  the  ”AUTO”  position.
In  the  automatic  operation  mode,  the  air
conditioning  selects  the  most  suitable  fan

speed and air flow according to the tem-

perature.
You may use manual controls if you want

to select your own settings.

Fan speed selector

Turn the knob to adjust the fan speed—to

the  right  to  increase,  to  the  left  to  de-
crease.
In  automatic  operation,  you  do  not  have
to  adjust  the  fan  speed  unless  you  desire

another fan speed mode.
Turning the fan speed selector knob to

”AUTO” position turns on the air condition-

ing. At this time, the ”A/C” button indicator
comes on regardless of whether or not the

”A/C” button is pressed in.

Temperature selector

Turn the knob to adjust the temperature—

to the right to warm, to the left to cool.
In automatic operation, turn the knob to

the desired temperature.

Air flow selector

Turn  the  knob  to  select  the  vents  used  for
air  flow.
In  automatic  operation,  you  do  not  have
to  select  the  air  flow  unless  you  desire

another air flow mode.

1. Panel—

Air flows mainly from the

instrument panel vents.

2. Bi

−

level—

Air flows from both the floor

vents and the instrument panel vents.

3. Floor—

Air flows mainly from the floor

vents.
It is recommended to close the lower

vent. For details about it, see ”Instru-
ment panel vents” described below.

4. Floor/Windshield—

Air

flows

mainly

from the floor vents and windshield

vents.
It is recommended to close the lower

vent. For details about it, see ”Instru-

ment panel vents” described below.
This position allows the air intake to

select  ”Fresh”  automatically.  This  is  to
clean  up  the  front  view  more  quickly.
Press  the  ”A/C”  button  for  dehumidified

heating or cooling. This setting clears
the front view more quickly.

5. Windshield—

Air flows mainly from the

windshield vents.
It is recommended to close the lower

vent.  For  details  about  it,  see  ”Instru-
ment  panel  vents”  described  below.
This  position  allows  the  air  intake  to
select  ”Fresh”  automatically.  This  is  to

clean up the front view more quickly.
Press the ”A/C” button for dehumidified

heating or cooling. This setting clears

the front view more quickly.

For details about air flow selector settings,

see ”Air flow selector settings” described

below.

«
...
148
149
150
151
152
...
»

Содержание 2001 Land Cruiser

































































































































































































































































































Отзывы:

Нет отзывов