Toyota 2001 Land Cruiser Скачать руководство пользователя страница 230

Страница: 230 / 288

’01 L/C U (L/O 0008)

226

CAUTION

Use extreme caution when towing ve-
hicle. Avoid sudden starts or erratic

driving maneuvers which would place

excessive stress on the emergency
towing hook and towing cable or

chain. The hook and towing cable or

chain may break and cause serious
injury or damage.

NOTICE

Do not use front and rear eyelets.
It is not designed for towing.

Use only a cable or chain specifi-

cally intended for use in towing ve-
hicles. Securely fasten the cable or

chain to the towing hook provided.

Before towing, release the parking brake

and put the transmission in ”N”. Unlock

the center differential. The key must be in
”ACC” (engine off) or ”ON” (engine run-

ning).

CAUTION

If the engine is not running, the pow-
er assist for the brakes and steering

will not work so steering and braking

will be much harder than usual.

Before emergency towing, check that

the hook is not broken or damage and

that the installation bolts are not loose.

Fasten the towing cable or chain se-

curely to the hook.

Do not jerk the hook. Apply steady and

even force.

To avoid damaging the hook, do not
pull from the side or at a vertical

angle. Always pull straight ahead.

—Emergency towing hook

precautions

Содержание 2001 Land Cruiser

































































































































































































































































































Результаты поиска

Содержание 2001 Land Cruiser

Отзывы:

Toyota 2001 Land Cruiser, Руководство пользователя, Страница: 230 / 288

Результаты поиска

Содержание 2001 Land Cruiser

Отзывы: