ZK1800
SWING GATE OPERATOR USER’S MANUAL
3
1. Important Safety Information
Read the entire user’s manual before beginning installation, and carefully obey the
following instructions:
The gate operator should be installed by a qualified technician. DO NOT in any way modify
the components of the gate operator, otherwise, serious personal injury or property damage
may occur.
To prevent the risk of electrocution, be sure to turn off all power to the ZK1800 until
installation is complete.
The operator should be switched off before repairing it or opening its cover.
When opening or closing the gate, do not attempt to walk or drive through the gate. Do not
touch the gate while in operation.
The auto-stop function must be checked during installation to ensure that the gate can
auto-stop in the event of obstruction.
This auto-stop function should be regularly inspected and adjusted, if necessary.
Children should not be allowed to play near or operate automatic gates.
Keep the remote control away from children.
The automatic gate operator must be grounded.
Be careful when in close proximity to moving parts where hands or fingers could be pinched.
Do not allow control devices to be placed so that a person can access them by reaching
through the gate.
Never active your gate operator until you ensure that the area is clear of people, pets or other
obstructions.
The entrance is for vehicles only. Pedestrians must use a separate entrance.
Our company reserves the right to change the design and specification without prior
notification.
Failure to comply with the instructions above may result in personal injury or property damage. Our
company does not accept responsibility for damage or injury resulting from installing this operator.
2. Additional Features
Use this operator with single or double swing gates.
Supports gate leafs up to 300kg and 3m.
Supports up to 25 RF remotes, 2 included.
User programmable and user erasable remote codes.
RF hopping code technology prevents your remote code being accessible to others.
For your safety, the ZK1800 will stop if it encounters an obstruction during closing or opening.
Manual key release design for emergency purposes.
