manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

vi

PORTÉGÉ/TECRA R700 Series

FCC information

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

■

Reorient or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

■

Consult the dealer or an experienced radio/TV technician for help.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including 

interference that may cause undesired operation.

Contact

Address:

TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618-1697

Telephone:

(949) 583-3000

Only peripherals complying with the FCC class B limits may be attached to 
this equipment. Operation with non-compliant peripherals or peripherals 
not recommended by TOSHIBA is likely to result in interference to radio 
and TV reception. Shielded cables must be used between the external 
devices and the computer’s external monitor port, Universal Serial Bus 
(USB 2.0) ports, eSATA/USB combo port, Mini DisplayPort, serial port and 
microphone jack. Changes or modifications made to this equipment, not 
expressly approved by TOSHIBA or parties authorized by TOSHIBA could 
void the user’s authority to operate the equipment.

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Panasonic CF-45 Series Operating Instructions Manual preview
CF-45 Series
Бренд: Panasonic Страницы: 32
Panasonic CF-30 Series Operating Instructions Manual preview
CF-30 Series
Бренд: Panasonic Страницы: 40
Panasonic CF-25 Operation Instructions Manual preview
CF-25
Бренд: Panasonic Страницы: 46
Gateway M685 Setup preview
M685
Бренд: Gateway Страницы: 1
Medion Akoya E4212 Quick Start Manual preview
Akoya E4212
Бренд: Medion Страницы: 2
Rugged Computing ATLAS slim 14 Assembly Manual preview
ATLAS slim 14
Бренд: Rugged Computing Страницы: 43
Samsung Galaxy Book Pro NP935XDB-KC1UK User Manual preview
Galaxy Book Pro NP935XDB-KC1UK
Бренд: Samsung Страницы: 105
Lenovo 61A6 User Manual preview
61A6
Бренд: Lenovo Страницы: 41
Lenovo 432826U Brochure preview
432826U
Бренд: Lenovo Страницы: 2
Lenovo 43Y3111 Initial Setup preview
43Y3111
Бренд: Lenovo Страницы: 2
Lenovo 63664DU - ThinkPad X60 Tablet 6366 Supplementary Manual preview
63664DU - ThinkPad X60 Tablet 6366
Бренд: Lenovo Страницы: 74
Lenovo 43752BU User Manual preview
43752BU
Бренд: Lenovo Страницы: 44
Lenovo 64577WU Brochure preview
64577WU
Бренд: Lenovo Страницы: 4
Medion E1210 Manual preview
E1210
Бренд: Medion Страницы: 264
ZALMAN ZM-NS3000 User Manual preview
ZM-NS3000
Бренд: ZALMAN Страницы: 2
ZALMAN ZM-NC1500 mini User Manual preview
ZM-NC1500 mini
Бренд: ZALMAN Страницы: 4
ZALMAN ZM-NC2500S User Manual preview
ZM-NC2500S
Бренд: ZALMAN Страницы: 8
Gateway T-6208c Reference Manual preview
T-6208c
Бренд: Gateway Страницы: 160

Бренды по названию

Популярные бренды

Загрузить еще бренды