manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

4-36

PORTÉGÉ/TECRA R700 Series

Computer Handling

This section explains computer handling and maintenance.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust 
and dirt, and use care with all liquids around it.

■

Be careful not to spill liquids into the computer. If the computer does get 
wet, turn the power off immediately and let the computer dry completely 
- in these circumstance you should get the computer inspected by an 
authorized service provider in order to assess the scope of any 
damage.

■

Clean the plastics of the computer using a slightly water dampened 
cloth.

■

You can clean the display screen by spraying a small amount of glass 
cleaner onto a soft, clean cloth and then wiping the screen gently with 
the cloth.

Moving the computer

While the computer is designed for flexible day-to-day usage you should 
exercise a few simple precautions when moving it in order to help ensure 
trouble-free operation.

■

Before moving the computer, it is recommended that you change the 
setting associated with the Hard Disk Drive Protection feature. Please 
refer to the section, 

Using the Hard Disk Drive (HDD) Protection

, in this 

chapter for further information.

■

Make sure all disk/disc activity has ended before moving the computer - 
check that the HDD and other indicators on the front of the computer 
are off.

■

Turn off (shut down) the computer.

■

Disconnect the AC adaptor and all peripherals before moving the 
computer.

■

Close the display panel.

■

Do not pick up the computer by its display panel.

■

Before carrying your computer, shut it down, disconnect the AC adaptor 
and allow it to cool down - a failure to follow this instruction may result in 
minor heat injury.

■

Be careful not to subject the computer to impact or shock - a failure to 
follow this instruction could result in damage to computer, computer 
failure or loss of data.

Never spray cleaner directly onto the computer or let liquid run into any part 
of it. Never use harsh or caustic chemical products to clean the computer.

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Gateway NV52L Quick Start Manual preview
NV52L
Бренд: Gateway Страницы: 31
Gateway MX6111m Documentación Del Hardware preview
MX6111m
Бренд: Gateway Страницы: 64
Gateway MX6002m Guía De Referencia preview
MX6002m
Бренд: Gateway Страницы: 174
Gateway MT6704h Manual D'Installation preview
MT6704h
Бренд: Gateway Страницы: 2
Gateway MX6212j User Manual preview
MX6212j
Бренд: Gateway Страницы: 220
Gateway MT6228j Reference Manual preview
MT6228j
Бренд: Gateway Страницы: 146
Gateway MT6015j Reference Manual preview
MT6015j
Бренд: Gateway Страницы: 156
Gateway MT6221jb Reference Manual preview
MT6221jb
Бренд: Gateway Страницы: 134
Gateway ML6227v Príručka Pre Používateła preview
ML6227v
Бренд: Gateway Страницы: 114
Gateway ML6227q Felhasználói Kézikönyv preview
ML6227q
Бренд: Gateway Страницы: 114
Gateway ML6227z Referenční Příručka preview
ML6227z
Бренд: Gateway Страницы: 162
Gateway ML6227q Referencia Kézikönyv preview
ML6227q
Бренд: Gateway Страницы: 164
Gateway MT6704h Manual Du Matériel preview
MT6704h
Бренд: Gateway Страницы: 160
Gateway MD24 Reference Manual preview
MD24
Бренд: Gateway Страницы: 150
Gateway M675 Replacement Manual preview
M675
Бренд: Gateway Страницы: 8
Panasonic Toughbook CF-51PF66EBM Operating Instructions Manual preview
Toughbook CF-51PF66EBM
Бренд: Panasonic Страницы: 32
LEXIBOOK Laptop Master MFC105GBZ Instruction Manual preview
Laptop Master MFC105GBZ
Бренд: LEXIBOOK Страницы: 27
MSI GT725-212US Manual preview
GT725-212US
Бренд: MSI Страницы: 86

Бренды по названию

Популярные бренды

Загрузить еще бренды