manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

4-37

PORTÉGÉ/TECRA R700 Series

■

Never transport your computer with any cards installed - this may cause 
damage to either the computer and/or the card resulting in product 
failure.

■

Always use a suitable carry case when transporting the computer.

■

When carrying your computer, be sure to hold it securely so that it does 
not fall or hit anything.

■

Do not carry your computer by holding any of its protruding elements.

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard 
disk drive.

Using an acceleration sensor built into the computer, TOSHIBA HDD 
Protection detects vibration shocks and similar signs of movement of the 
computer, and automatically moves the Hard Disk Drive head to a safe 
position to reduce the risk of damage that could be caused by head-to-disk 
contact.

When vibration is detected, a message will be displayed on the screen, and 
the icon in the Taskbar notification area will change to the protection state. 
This message is displayed until the 

OK

 button is pressed or 30 seconds 

pass. When vibration subsides, the icon returns to the normal state.

Taskbar icon

TOSHIBA HDD Protection Properties

You can change the TOSHIBA HDD Protection settings by using the 
TOSHIBA HDD Protection Properties window. To open the window, click 

Start -> All Programs -> TOSHIBA -> Utilities -> HDD Protection 
Settings

. The window can also be started from the icon on the Taskbar or 

■

The TOSHIBA HDD Protection function does not guarantee that the 
hard disk drive will not be damaged.

■

 During audio/video playback, when the computer detects a shock or 
vibration and the hard disk drive's head is parked, the playback might 
be temporarily interrupted.

■

TOSHIBA HDD Protection cannot be used in models that are equipped 
with SSD.

State

Description

Normal

TOSHIBA HDD Protection is enabled. 

Protection

TOSHIBA HDD Protection is active. The hard disk 
drive head is in a safe position.

OFF

TOSHIBA HDD Protection is disabled.

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Panasonic Toughbook CF-Y5LWEZABM Operating Instructions Manual preview
Toughbook CF-Y5LWEZABM
Бренд: Panasonic Страницы: 40
Gateway 450ROG Service Manual preview
450ROG
Бренд: Gateway Страницы: 81
Hypertec IN-CRKTCLHY Brochure & Specs preview
IN-CRKTCLHY
Бренд: Hypertec Страницы: 1
J-PRO JL7100 User Manual preview
JL7100
Бренд: J-PRO Страницы: 50
Acer Aspire 5 A515-56 User Manual preview
Aspire 5 A515-56
Бренд: Acer Страницы: 87
Acer Aspire 9920G Series User Manual preview
Aspire 9920G Series
Бренд: Acer Страницы: 119
Acer Aspire 9500 Manual Do Utilizador preview
Aspire 9500
Бренд: Acer Страницы: 105
Acer TravelMate 8200 Guía Del Usuario preview
TravelMate 8200
Бренд: Acer Страницы: 98
Acer TravelMate 800 Series User Manual preview
TravelMate 800 Series
Бренд: Acer Страницы: 90
Acer TravelMate 8100 Manual Do Utilizador preview
TravelMate 8100
Бренд: Acer Страницы: 92
Acer TravelMate 8200 Manual Do Utilizador preview
TravelMate 8200
Бренд: Acer Страницы: 98
Fujitsu LIFEBOOK U7312 Operating Manual preview
LIFEBOOK U7312
Бренд: Fujitsu Страницы: 89
Fujitsu LIFEBOOK U904 Operating Manual preview
LIFEBOOK U904
Бренд: Fujitsu Страницы: 80
Fujitsu LIFEBOOK U745 Operating Manual preview
LIFEBOOK U745
Бренд: Fujitsu Страницы: 108
Fujitsu LIFEBOOK T937 Operating Manual preview
LIFEBOOK T937
Бренд: Fujitsu Страницы: 126
Fujitsu LifeBook U772 User Manual preview
LifeBook U772
Бренд: Fujitsu Страницы: 320
Fujitsu LIFEBOOK U5x4 Operating Manual preview
LIFEBOOK U5x4
Бренд: Fujitsu Страницы: 67
Fujitsu LIFEBOOK TH4410 Operating Manual preview
LIFEBOOK TH4410
Бренд: Fujitsu Страницы: 124

Бренды по названию

Популярные бренды

Загрузить еще бренды