manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

F-1

PORTÉGÉ/TECRA R700 Series

Appendix F

Appendix 

F

TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor application proactively monitors a 
number of system functions such as power consumption, battery health 
and the system cooling, informing you of significant system conditions. This 
application recognizes the system and individual component serial 
numbers, and will track specific activities related to the computer and their 
usage.

The collected information includes device operation time and number of 
actuations or status changes (i.e.: number of power button and 

FN

 key 

combination uses, AC adaptor, battery, LCD, fan, HDD, sound volume, 
wireless communication functionalities, TOSHIBA Hi-Speed Port Replicator 
and USB information), date of initial system use, and also computer and 
device usage (i.e.: power settings, battery temperature and recharging, 
CPU, memory, backlight illumination time, and temperatures for various 
devices). The stored data uses a very small portion of the total hard disk 
capacity, approximately 10MB or less per year.

This information is used to identify and provide a notification of system 
conditions which may effect the performance of your Toshiba computer. It 
may also be used to help diagnose problems should the computer require 
service by Toshiba or Toshiba's authorized service providers. Additionally, 
Toshiba may also use this information for quality assurance analysis.

Subject to the use restrictions above, the HDD data logged may be 
transferred to entities located outside of your country or region of residence 
(e.g., European Union). Those countries may or may not have the same 
data protection laws or data protection levels as required by your home 
country or region.

Once enabled, you may disable the TOSHIBA PC Health Monitor at any 
time by uninstalling the software via 

Uninstall a program

 in the 

Control 

Panel

. Doing so will automatically delete all collected information from the 

HDD.

The TOSHIBA PC Health Monitor software does not extend or modify 
Toshiba's obligations under its standard limited warranty in any way. 
Toshiba's standard limited warranty terms and limitations apply.

Starting the TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor can be started using the following 
methods:

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Acer FO200 Guía Rápida preview
FO200
Бренд: Acer Страницы: 15
Acer TravelMate 4210 Guía Del Usuario preview
TravelMate 4210
Бренд: Acer Страницы: 84
Panasonic Toughbook CF-Y5LWEZZBM Operating Instructions Manual preview
Toughbook CF-Y5LWEZZBM
Бренд: Panasonic Страницы: 36
Acer Nitro V 15 User Manual preview
Nitro V 15
Бренд: Acer Страницы: 96
Fujitsu Siemens Computers LITELINE Series Operating Manual preview
LITELINE Series
Бренд: Fujitsu Siemens Computers Страницы: 64
chiliGREEN A15CR03 User Manual preview
A15CR03
Бренд: chiliGREEN Страницы: 43
Acer TravelMate TMP215-52 Lifecycle Extension Manual preview
TravelMate TMP215-52
Бренд: Acer Страницы: 48
Acer CB515-1HT User Manual preview
CB515-1HT
Бренд: Acer Страницы: 31
Acer 4720-4721 - Aspire User Manual preview
4720-4721 - Aspire
Бренд: Acer Страницы: 113
Acer 4720 6011 - TravelMate User Manual preview
4720 6011 - TravelMate
Бренд: Acer Страницы: 101
Acer 2000 Series User Manual preview
2000 Series
Бренд: Acer Страницы: 98
Acer 1350 series User Manual preview
1350 series
Бренд: Acer Страницы: 104
Acer 1410 2039 - Aspire (French) Manuel D'Utilisation preview
1410 2039 - Aspire
Бренд: Acer Страницы: 104
Acer 1410 2039 - Aspire Service Manual preview
1410 2039 - Aspire
Бренд: Acer Страницы: 129
Acer 1300 series User Manual preview
1300 series
Бренд: Acer Страницы: 96
Acer 4740G series Service Manual preview
4740G series
Бренд: Acer Страницы: 218
Acer 5515 5879 - Aspire - Athlon 1.6 GHz Service Manual preview
5515 5879 - Aspire - Athlon 1.6 GHz
Бренд: Acer Страницы: 177
Acer 4672WLMi - TravelMate - Core Duo 1.66 GHz User Manual preview
4672WLMi - TravelMate - Core Duo 1.66 GHz
Бренд: Acer Страницы: 62

Бренды по названию

Популярные бренды

Загрузить еще бренды