manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

D-3

PORTÉGÉ/TECRA R700 Series

However, there is no guarantee that interference will not occur in a 
particular installation.

If this equipment does cause harmful interference to radio or television 
reception, which can be determined by tuning the equipment off and on, the 
user is encouraged to try and correct the interference by one or more of the 
following measures:

■

Reorient or relocate the receiving antenna

■

Increase the distance between the equipment and the receiver.

■

Connect the equipment to outlet on a circuit different from that to which 
the receiver is connected.

■

Consult the dealer or an experienced radio/TV technician for help.

TOSHIBA is not responsible for any radio or television interference caused 
by unauthorized modification of the devices included with this Bluetooth 
Adaptor from TOSHIBA, or the substitution or attachment of connecting 
cables and equipment other than specified by TOSHIBA.

The correction of interference caused by such unauthorized modification, 
substitution or attachment will be the responsibility of the user.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth Adaptor from TOSHIBA is far 
below the FCC radio frequency exposure limits. Nevertheless, the 
Bluetooth Adaptor from TOSHIBA shall be used in such a manner that the 
potential for human contact during normal operation is minimized.

The installer of this radio equipment must ensure that the antenna is 
located or pointed such that it does not emit RF field in excess of Health 
Canada limits for the general population; consult Safety Code 6, obtainable 
from Health Canada's website www.hc-sc.gc.ca.

Taiwan

Article 12

Without permission granted by the DGT or NCC, 
any company, enterprise, or user is not allowed to 
change frequency, enhance transmitting power or 
alter original characteristic as well as performance 
to an approved low power radio-frequency devices.

Article 14

The low power radio-frequency devices shall not 
influence aircraft security and interfere legal 
communications; If found, the user shall cease 
operating immediately until no interference is 
achieved.

The said legal communications means radio 
communications is operated in compliance with the 
Telecommunications Act.

The low power radio-frequency devices must be 
susceptible with the interference from legal 
communications or ISM radio wave radiated 
devices.

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Samsung NP600B4C User Manual preview
NP600B4C
Бренд: Samsung Страницы: 143
Samsung NP550P5C User Manual preview
NP550P5C
Бренд: Samsung Страницы: 122
BELINEA b.book 5.1 User Manual preview
b.book 5.1
Бренд: BELINEA Страницы: 48
Asus CHROMEBOOK C204EE E-Manual preview
CHROMEBOOK C204EE
Бренд: Asus Страницы: 94
Asus A8Dc - A1 Hardware User Manual preview
A8Dc - A1
Бренд: Asus Страницы: 71
Panasonic Toughbook C2 Specification preview
Toughbook C2
Бренд: Panasonic Страницы: 2
Panasonic Toughbook C1 Brochure preview
Toughbook C1
Бренд: Panasonic Страницы: 2
Panasonic Toughbook 74 Brochure preview
Toughbook 74
Бренд: Panasonic Страницы: 2
Panasonic The Toughbook 52 Specifications preview
The Toughbook 52
Бренд: Panasonic Страницы: 2
Panasonic The Toughbook 52 Brochure preview
The Toughbook 52
Бренд: Panasonic Страницы: 2
Panasonic CF52PFNBEPM Brochure preview
CF52PFNBEPM
Бренд: Panasonic Страницы: 2
Panasonic Toughbook CF-18 mk3 Supplementary Instructions Manual preview
Toughbook CF-18 mk3
Бренд: Panasonic Страницы: 16
Panasonic CF-WGP Series Addendum preview
CF-WGP Series
Бренд: Panasonic Страницы: 2
Panasonic CF-W5LWEZZBM Brochure preview
CF-W5LWEZZBM
Бренд: Panasonic Страницы: 2
Panasonic Toughbook CF-18BDAZXMM User Manual preview
Toughbook CF-18BDAZXMM
Бренд: Panasonic Страницы: 40
Panasonic CF71EY6GBAM - PERSONAL COMPUTER Operating Instructions Manual preview
CF71EY6GBAM - PERSONAL COMPUTER
Бренд: Panasonic Страницы: 32
Panasonic CF-XZ6 series Operating Instructions Manual preview
CF-XZ6 series
Бренд: Panasonic Страницы: 24
Panasonic Toughbook C1 Operating Instructions Manual preview
Toughbook C1
Бренд: Panasonic Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды