manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

6-4

PORTÉGÉ/TECRA R700 Series

Real Time Clock (RTC) battery

The Real Time Clock (RTC) battery provides power for the internal real 
time clock and calendar function and also maintains the system 
configuration while the computer is turned off. If the RTC battery becomes 
completely discharged, the system will lose this information and the real 
time clock and calendar will stop working - in this instance the following 
message will be displayed when you turn on the power:

S

**** RTC Power Failure ****
 Check system. Then press [F2] key. 

You can change the Real Time Clock settings by turning the computer on 
while pressing the F2 key and then release the F2 key when the TOSHIBA 
Leading Innovation >>> screen appears. Please refer to chapter 8 

Troubleshooting

 for further information.

Care and use of the battery pack

This section provides the important safety precautions in order to handle 
your battery pack properly.

Refer to the enclosed

 Instruction Manual for Safety and Comfort 

for 

detailed precautions and handling instructions.

The RTC battery does not charge while the computer is turned off even if 
the AC adaptor is attached.

■

Make sure the battery is securely installed in the computer before 
attempting to charge the battery pack. Improper installation could 
generate smoke or fire, or cause the battery pack to rupture.

■

Keep the battery pack out of reach of infants and children. It can cause 
injury.

■

The battery pack is lithium ion batteries, which can explode if not 
replaced, used, handled or disposed of properly. Dispose of the battery 
as required by local ordinances or regulations. Use only batteries 
recommended by TOSHIBA as replacements.

■

The computer's RTC battery is a Ni-MH battery and should be replaced 
only by your dealer or by a TOSHIBA service representative. The 
battery can explode if not properly replaced, used, handled or disposed. 
Dispose of the battery as required by local ordinances or regulations.

■

Charge the battery pack only in an ambient temperature between 5 and 
35 degrees Celsius. Otherwise, the electrolyte solution might leak, 
battery pack performance might deteriorate and the battery life might be 
shortened.

■

Never install or remove the battery pack without first turning off the 
power and disconnecting the AC adaptor. Never remove the battery 
pack while the computer is in Sleep Mode. Data could be lost.

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

Panasonic Toughbook CF-28 Series Operating Instructions Manual preview
Toughbook CF-28 Series
Бренд: Panasonic Страницы: 36
LEXIBOOK Laptop Master MFC105GBZ Instruction Manual preview
Laptop Master MFC105GBZ
Бренд: LEXIBOOK Страницы: 27
Razer Blade Pro RZ09-0287 User Manual preview
Blade Pro RZ09-0287
Бренд: Razer Страницы: 18
Acer TravelMate P4 14 User Manual preview
TravelMate P4 14
Бренд: Acer Страницы: 93
Acer TravelMate P2 14 User Manual preview
TravelMate P2 14
Бренд: Acer Страницы: 88
Acer P259-MG User Manual preview
P259-MG
Бренд: Acer Страницы: 82
Acer P449-MG User Manual preview
P449-MG
Бренд: Acer Страницы: 83
Lenovo 0769ALU Specification Sheet preview
0769ALU
Бренд: Lenovo Страницы: 12
Lenovo 100e Chromebook Gen 3 Regulatory Notice preview
100e Chromebook Gen 3
Бренд: Lenovo Страницы: 39
Lenovo 08622KU Specifications preview
08622KU
Бренд: Lenovo Страницы: 2
Lenovo 087325U Specifications preview
087325U
Бренд: Lenovo Страницы: 2
Lenovo 08763FU Specifications preview
08763FU
Бренд: Lenovo Страницы: 1
Lenovo 100S Chromebook-11IBY Hardware Maintenance Manual preview
100S Chromebook-11IBY
Бренд: Lenovo Страницы: 56
Lenovo 100e Chromebook 2nd Gen Setup Manual preview
100e Chromebook 2nd Gen
Бренд: Lenovo Страницы: 7
Lenovo 10249JU Brochure preview
10249JU
Бренд: Lenovo Страницы: 2
Lenovo 10372GU Specifications preview
10372GU
Бренд: Lenovo Страницы: 2
Lenovo 1024ASU Specifications preview
1024ASU
Бренд: Lenovo Страницы: 2
Lenovo 10372GU User Manual preview
10372GU
Бренд: Lenovo Страницы: 51

Бренды по названию

Популярные бренды

Загрузить еще бренды