manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

7-5

PORTÉGÉ/TECRA R700 Series

a USB floppy diskette drive by setting the 

USB-FDD Legacy Emulation

 

item to 

Enabled

.

SATA

eSATA

This feature allows you to set conditions for SATA.

SATA Interface setting

This feature allows you to set SATA interface setting.

LAN

Wake-up on LAN

This feature lets the computer's power be turned on from shudown when it 
receives a wake-up packet (Magic packet) from the LAN.

Power will be automatically turned on when a signal is received from an 
administrator's computer which is connected via a network.

The following settings can be changed when the Built-in LAN is 

Enabled

.

Connect the AC adaptor when using the Wake-up on LAN function. The 

Enabled

Enables the USB floppy diskette drive legacy 
emulation function (Default).

Disabled

Disables the USB floppy diskette drive legacy 
emulation function.

Enabled

Enables the eSATA port (Default).

Disabled

Disables the eSATA port in order to save power.

Performance

Let HDD/SSD work with maximum performance. 
(Default)

Battery life

Let HDD/SSD work with battery life mode. If this 
setting is selected, this caused performance down.

Do not install or remove a memory module while Wake-up on LAN is 
enabled.

■

The Wake-up on LAN function consumes power even when the system 
is off. Leave the AC adaptor connected while using this feature.

■

Regarding Wake-up on LAN from sleep or hibernation, you must check 
the "Allow the device to wake the computer" check box within the LAN 
Device properties (this feature does not effect the Wake-up on LAN 
from sleep or hibernation).

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
Бренд: NEC Страницы: 4
Gateway P-6831 Reference Manual preview
P-6831
Бренд: Gateway Страницы: 168
Gateway Solo 1400 Replacement Manual preview
Solo 1400
Бренд: Gateway Страницы: 12
Acer Aspire 5500 Manual Do Utilizador preview
Aspire 5500
Бренд: Acer Страницы: 92
Acer TravelMate TMP215-52 Lifecycle Extension Manual preview
TravelMate TMP215-52
Бренд: Acer Страницы: 48
Acer CB515-1HT User Manual preview
CB515-1HT
Бренд: Acer Страницы: 31
Fujitsu LIFEBOOK P3110 Upgrade preview
LIFEBOOK P3110
Бренд: Fujitsu Страницы: 36
Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz User Manual preview
P1610 - LifeBook - Core Solo 1.2 GHz
Бренд: Fujitsu Страницы: 128
Gateway EC38 Service Manual preview
EC38
Бренд: Gateway Страницы: 118
Gateway MX6134j (Japanese) Hardware Reference Manual preview
MX6134j
Бренд: Gateway Страницы: 76
Avita CN6613 E-Manual preview
CN6613
Бренд: Avita Страницы: 46
IBM THINKPAD Z61E User Manual preview
THINKPAD Z61E
Бренд: IBM Страницы: 2
IBM THINKPAD T61 Frequently Asked Questions Manual preview
THINKPAD T61
Бренд: IBM Страницы: 8
IBM THINKPAD T43 - Manual preview
THINKPAD T43 -
Бренд: IBM Страницы: 17
Gateway M505 User Manual preview
M505
Бренд: Gateway Страницы: 312
Gateway M405 User Manual preview
M405
Бренд: Gateway Страницы: 324
Tadpole COMET15 User Manual preview
COMET15
Бренд: Tadpole Страницы: 116
Texas Instruments Extensa 450 Series Maintenance Manual preview
Extensa 450 Series
Бренд: Texas Instruments Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды