manualshive.com logo in svg

Toshiba TECRA R700, Руководство пользователя


Поделиться
Скачать
background image

User’s Manual

D-2

PORTÉGÉ/TECRA R700 Series

Because products with Bluetooth wireless technology operate within the 
guidelines found in radio frequency safety standards and 
recommendations, TOSHIBA believes Bluetooth wireless technology is 
safe for use by consumers. These standards and recommendations reflect 
the consensus of the scientific community and result from deliberations of 
panels and committees of scientists who continually review and interpret 
the extensive research literature.

In some situations or environments, the use of Bluetooth wireless 
technology may be restricted by the proprietor of the building or responsible 
representatives of the organization. These situations may for example 
include:

■

Using the equipment with Bluetooth wireless technology on board of 
airplanes, or

■

In any other environment where the risk of interference to other devices 
or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices 
in a specific organization or environment (e.g. airports), you are 
encouraged to ask for authorization to use the device with Bluetooth 
wireless technology prior to turning on the equipment.

Regulatory statements

General

This product complies with any mandatory product specification in any 
country/region where the product is sold. In addition, the product complies 
with the following.

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has 
been provided with the CE mark accordingly.

Canada - Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference, 
including interference that may cause undesired operation of this device.

The term “IC” before the equipment certification number only signifies that 
the Industry Canada technical specifications were met.

USA-Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate 
radio frequency energy. If not installed and used in accordance with the 
instructions, it may cause harmful interference to radio communications. 

Содержание TECRA R700







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECRA R700

NEC VERSA SX HARD DISK DRIVE Upgrade Manual preview
VERSA SX HARD DISK DRIVE
Бренд: NEC Страницы: 6
NEC Versa LX Product Manual preview
Versa LX
Бренд: NEC Страницы: 46
NEC Versa LX User Manual preview
Versa LX
Бренд: NEC Страницы: 96
Gateway 400 Service Manual preview
400
Бренд: Gateway Страницы: 87
Panasonic Toughbook CF-74JCL02AM Operating Instructions Manual preview
Toughbook CF-74JCL02AM
Бренд: Panasonic Страницы: 36
Speed Link PECOS Universal Quick Install Manual preview
PECOS Universal
Бренд: Speed Link Страницы: 4
MSI GS65 Stealth THIN-053 Applications Manual preview
GS65 Stealth THIN-053
Бренд: MSI Страницы: 108
Acer TravelMate 2310 Manuel D'Utilisation preview
TravelMate 2310
Бренд: Acer Страницы: 63
Acer TRAVELMATE TravelMate 2350 Manual Do Utilizador preview
TRAVELMATE TravelMate 2350
Бренд: Acer Страницы: 88
Acer TravelMate 2310 Manual Do Utilizador preview
TravelMate 2310
Бренд: Acer Страницы: 65
Acer Travelmate 2300 Series Manual Do Utilizador preview
Travelmate 2300 Series
Бренд: Acer Страницы: 96
Acer TRAVELMATE TravelMate 2350 User Manual preview
TRAVELMATE TravelMate 2350
Бренд: Acer Страницы: 86
Acer Travelmate 2300 Series Manuel D'Utilisation preview
Travelmate 2300 Series
Бренд: Acer Страницы: 96
Acer TravelMate 2420 Guía Del Usuario preview
TravelMate 2420
Бренд: Acer Страницы: 78
Acer TravelMate 2420 Manual Do Utilizador preview
TravelMate 2420
Бренд: Acer Страницы: 78
Acer TravelMate 240 series User Manual preview
TravelMate 240 series
Бренд: Acer Страницы: 92
Acer TRAVELMATE TravelMate 2350 Manuel D'Utilisation preview
TRAVELMATE TravelMate 2350
Бренд: Acer Страницы: 86
Acer TravelMate 240 series Manual Do Utilizador preview
TravelMate 240 series
Бренд: Acer Страницы: 98

Бренды по названию

Популярные бренды

Загрузить еще бренды