Toshiba Magnia Z310, Руководство пользователя

Страница: 63 / 418

Getting Started
Setting the system configuration
63
- Sync Transfer Rate (MB/Sec): [160]
Specifies the maximum synchronous transfer rate of the onboard SCSI controller.
- Initiate Wide Negotiation: [Yes]
Set this item to Yes to specify Wide SCSI (16 bit data width).
- Enable Disconnection: [Yes]
Set this item to Yes to make the adapter activate the disconnect/reconnect function
and permit multiple-command processing.
- Send Start Unit Command: [Yes]
Specifies whether a start unit command is to be sent from the adapter to start the
SCSI device.
- Enable Write-Back Cache: [N/C]
Specifies whether to use the write-back cache.
- BIOS Multiple LUN Support: [No]
Specifies whether logical unit numbers are supported.
- Include in BIOS Scan: [Yes]
Specifies whether the device is to be scanned when SCSI BIOS starts.
❖
Advanced Configuration Options
Sets up detailed data on the SCSI controller.
- Reset SCSI Bus at IC Initialization: [Enabled]
Specifies whether or not to reset the SCSI bus during the SCSI controller resetting
process.
- Display <Ctrl><A> Message During BIOS Initialization: [: [Enabled]
Sets data to be displayed in the SCSI Utility startup message.
- Extended BIOS Translation for DOS Drive > 1Gbyte: [Enabled]
Specifies whether extended BIOS is to be enabled or disabled for a DOS drive with a
disk capacity exceeding 1 GB.
- Verbose/Silent Mode: [Verbose]
Controls the data displayed during startup.
- Host Adapter BIOS: [Enabled]
Enables or disables the Host SCSI Adapter BIOS.