Toshiba Magnia Z310, Руководство пользователя

Страница: 249 / 418

IDE MegaRAID Configuration Console
Managing the IDE Controllers
249
To exit this page, click on Config View or Scan Devices.
Make Contents
of Array Drives
Identical after
Check
Consistency
error found If MegaRAID Configuration Console finds mismatches
between two mirrored (RAID 1) arrays, it will copy the data
from one drive to the other to make them identical.
* - This option is valid only for arrays set for reliability mode
(RAID 1 mirrored arrays.)
Delete Activity
Log Files when
it reaches
maximum
Allowed Size This deletes the activity log file if it reaches the maximum
allowable size (as set in the box below this item.)
If checked, the activity log file is overwritten when it reaches
the maximum size. If not checked, the file stops updating
when it reaches the maximum size and is not updated
anymore.
Activity Log File
Size Use this box to select the maximum size for the activity log
file.
Enable
S.M.A.R.T. on
Physical Drive By checking this option, it enables S.M.A.R.T. monitoring of
all physical drives attached to the RAID controller.
S.M.A.R.T. Poll
Interval This setting allows you to set the time interval that
S.M.A.R.T. status is checked.
NOTE: Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) is a
feature built into the hard disk drive that checks for potential problems that can
crash the hard disk drive. Not all hard disk drives have this feature.
Field Description