57
Viewing
・
Listening
and Operation
Set up
Recording
Others
Introduction
56
Viewing
・
Listening
and Operation
Set up
Recording
Others
Introduction
Followings are the meaning of each part.
Recording Images on FTP Server (Cont.)
EX/MD
(keyword)
yyyymmdd
HHMMSS
***
ーー
A/B/C
"EX" indicates this is the file for Alarm In.
"MD" indicates this is the file for Motion Detection.
Enter user defined keyword.
Indicates date (Year, Month, Day).
(e.g. June 26, 2006 → 20060626)
Indicates time (Hour, Minute, Second).
(e.g. 23:59:00 → 23 59 00).
Time is displayed in 24-hour time display.
If the camera records more than one image at the same
period, the order is indicated with 3-digit number. The bigger
the number, the newer (latest) the image.
Indicates total number of generated alarm(s). when the
number reaches to 99, it returns to 00 and starts adding
again. Reset to "00" also when the power is turned off.
A: Pre-Alarm Recording images.
B: Image when an alarm is generated.
C: Post-Alarm Recording.
5) Entering Server path
･ Set a server path for recording of files. Ask your FTP server
administrator if you have a question.
■ Recording by alarm
(Displayed if "Alarm Recording" is chosen as an FTP record
conditions.)
Set if recording by Alarm In/Motion Detection is desired.
･ To detect external alarms or motion, set to enable "Alarm In" or "Motion
Detection" in alarm setting (see page 71).
1) Setting number of pre-Recording
･ Choose the number of images
0, 3, 5 or 10 images
2) Setting number of post-Recording
･ Choose the number of images
0, 3, 5, 10, 20, 60 or 120 images
NOTE
●
The number of recorded images may be decreased depending on the network
condition, recording interval or other factor.
3) Setting a "Recording Cycle"
･ Recording at a rate of one images per set time (seconds).
･ Choose a time interval to set.
1/30, 1/15, 1/10, 1/5, 1/3 1/2, 1, 2, 3, 5, 10, 30, 60, 120 or
180 second
NOTE
●
The cycle may shift depending on image size and networking conditions.
4) Enter "Record File Name"
･ Enter characters (no more than 16 characters) in the part
described as (keyword).
File name will be shown like this:
e.g. EX (Keyword) yyyy mm dd HH MM SS ***N--A.JPG
NOTE
●
You cannot use these characters:
\ / : ; , | ? * < >
"
●
When "Fixed" is set, the file name will be the text entered in the "Record File
Name" keyword field. For example, if "toshiba" is entered as the keyword, the
file name will be "toshiba.jpg". The file will be overwritten with the same file
name on the FTP server with every new transfer.
