Toshiba IK-WB15A - IP Network Camera, Руководство пользователя

Страница: 18 / 64

35
Viewing
・
Listening
and Operation
Introduction
Set up
Recording
Others
34
Viewing
・ Listening
and Operation
Introduction
Set up
Recording
Others
Number and Item Description
④ Display controller Clicking the button displays the controller in a
separate window.
⑤ Setup Menu Display Clicking the button will display the Setup Menu
screen in another window.
⑥ Alarm notification This alarm message is displayed when "Alarm In" ( page 72)
or "Motion Detection" (page 72) is activated. The alarm
message disappears if it is clicked.
7
Displayed images When displaying present normal images, "LIVE" will be
displayed, and when displaying images from the Alarm
List or Record List, "PLAYBACK" will be displayed on
the screen. You can switch these views using the
controller.
8
Time and date The current time and date of the network camera are
shown when "LIVE" is displayed, and the recorded time
and date are shown when "PLAYBACK" is displayed on
the screen. When in PLAYBACK mode, S) or E) may be
shown with the time and date. "S)" and "E)" are
sometimes displayed in the PLAYBACK mode as date
and time data. "S)" means start of playback images
and "E)," end of playback images. In these modes,
images or date and time cannot be updated. Operate
playback on the controller.
■ Moving the screen center.
1
Click on any area in the Camera Image screen.
2
The camera moves so that the clicked point becomes
the center of the image.
■ Optical zoom operation with a mouse scroll wheel
When the Camera Image screen is active, you can zoom with the mouse
scroll wheel.
■ Camera image screen
Number and Item Description
① Camera name
② Operation Buttons
③ Operation Buttons
The name of the camera displaying live images.
: Each click of the button will zoom in on the
image. Maximum zoom is 2.6x.
: Clicking the button will zoom out.
: Equal size button. Click to reset to a viewer size
to the camera resolution.
: Clicking the button will change the display to the
button and will output sound.
Clicking the button will change the display to the
button and will not output sound.
: Clicking the button will change the display to the
button and will output sound from the personal
computer microphone.
Clicking the button will change the display to the
button and will not output sound from the personal
computer microphone.
■ Audio
Audio In from the network camera can be heard through the Audio Out of
the personal computer.
Set audio input to "ON" in "Camera-Audio" on page 77 and set the
button of the Camera Image button to
.
Viewing and listening (Cont.)
1
3
4
5
7
8
2
3
NOTE
●
This function may not operate depending on the mouse setup settings. Please
check the PC
’
s mouse setup.
●
Microphone input and audio output are not available at the same time.