104
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
105
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
1601213
1601214
1601215
1601216
1601217
1601218
1620001
1620002
1621001
1621002
1621003
1621004
1621005
1621006
1621011
1621012
1621013
1621014
1621015
1631001
1630002
1631003
1631004
1631005
2000002
2000221
2000223
2000226
2000227
2000228
2000229
2000230
2000231
2000232
2000233
2000234
2000235
2000236
2000237
2000238
2000239
2000240
2000241
2000242
2000501
2000502
2000503
2001504
2000505
2001506
2001507
2000516
ID
Output message
Message
ftc2> Server not available.
ftc2> CWD error.
ftc2> Directory not found or no permissions.
ftc2> Server error on binary mode.
ftc2> Server error on passive mode.
ftc2> Server resource not available.
ddns> Success to connect server.
ddns> Activate communication ok.
ddns> Failed to connect server.
ddns> Activate communication failed.
ddns> Received server error.
ddns> Received few informations.
ddns> Received unknown status.
ddns> Received unknown format.
ddns> Failed to resolve name.
ddns> Failed to resolve name.
ddns> Failed to resolve name.
ddns> Initializing error.
ddns> Error terminated.
ntpc> Failed to launch NTPc.
ntpc> Successfully adjusted.
ntpc> Failed to adjust.
ntpc> NTP error.
ntpc> Unknown server name.
info> Rebooting...
rgst> Success to save. Camera info.
rgst> Success to save. Alarm info.
rgst> Success to save. Recording info.
rgst> Success to save. FTPc info.
rgst> Success to save. Sound info.
rgst> Success to save. Network info.
rgst> Success to save. Mail info.
rgst> Success to save. DDNS info.
rgst> Success to save. FTPs info.
rgst> Success to save. Band Control.
rgst> Success to save. User restriction.
rgst> Success to save. User functions.
rgst> Success to save. Malti reg.
rgst> Success to save. Malti selection.
rgst> Success to save. Admin info.
rgst> Success to save. Syslog info.
rgst> Success to save. PT info.
rgst> Success to save. Preset info.
rgst> Success to save. Autopatrol info.
upld> Start Uploading...
upld> - File type: ini file.
upld> - File type: firmware.
upld> ...Uploading fail.
upld> ...Uploading done.
upld> Invalid HTTP query.
upld> Invalid HTTP header.
upld> ...Updating done.
Server cannot be used.
Directory moving (CWD) is prohibited by the server.
Specified directory is not existing or is write disabled.
Binary mode is prohibited by the server.
Passive mode is prohibited by the server.
Server does not have adequate vacant capacity.
Succeeded in connecting the DDNS server.
Succeeded and responded in activate communication.
Failed to connect to the DDNS server.
Failed to connect to the DDNS server.
Activate communication failed.
Received "Server error" response.
Received response "Information inadequate or contract not
signed yet."
Received unknown status.
Received unknown format.
Failed to resolve DDNS server name.
Failed to resolve DDNS server name temporarily.
Unclear error notified in DDNS server name solution.
Failed to boot DDNS service program of the camera.
DDNS functions are halted due to an error in DDNS service
program of the camera.
Failed to boot NTP.
Succeeded in NTP time adjustment.
Failed to adjust time with NTP.
NTP error has occurred.
NTP server cannot be found.
Camera reboot
Camera setting has been made.
Alarm setting has been made.
Record setting has been made.
FTP client setting has been made.
Audio setting has been made.
Network setting has been made.
E-mail setting has been made.
DDNS setting has been made.
FTP server setting has been made.
Band control setting has been made.
User setting has been made.
User utilization function setting has been made.
Multi-view screen camera registration setting has been made.
Multi-view screen camera selection setting has been made.
Administrator function setting has been made.
Log setting has been made.
Pan/Tilt setting has been made.
Preset setting has been made.
Auto patrol setting has been made.
Started uploading configuration information file.
Started uploading configuration information file.
Started uploading firmware.
Failed in uploading.
Succeeded in uploading.
Error experienced in HTTP query. Refused HTTP request.
Error experienced in HTTP header. Refused HTTP request.
Camera rebooting was executed.
Log Display
Logs are saved in the memory contained in the camera.
Up to about 8000 logs can be saved.
1110001
1121001
1241001
1240002
1250001
1251002
1250003
1251004
1260001
1261002
1301001
1301002
1301003
1301004
1401011
1401012
1401013
1401014
1401015
1401016
1611001
1611002
1611021
1611022
1611023
1601101
1601102
1601103
1601104
1601105
1601106
1601107
1601108
1601100
1601113
1601114
1601115
1601116
1601117
1601118
1601201
1601202
1601203
1601204
1601205
1601206
1601207
1601208
1601200
webm> Reset to default configuration.
info> Battery is low.
ctrl> SD memory card full.
ctrl> SD memory card formatted.
ctrl> Successfully mounted SD memory card.
ctrl> Failed to mount SD memory card.
ctrl> Successfully unmounted SD memory card.
ctrl> Failed to unmount SD memory card.
ctrl> Successfully formatted SD memory card.
ctrl> Failed to format SD memory card.
strm> Invalid parameter on streaming.
strm> Unknown client ID on streaming.
strm> Not permitted ID or password on streaming.
strm> Streaming could not carry on.
rncp> Failed remote configuration.
rncp> Failed remote configuration.
rncp> Failed remote configuration.
rncp> Failed remote configuration.
rncp> Failed remote configuration.
rncp> Failed remote configuration.
mail> Not found SMTP Server.
mail> Faile to connect SMTP Server.
mail> Not found POP Server.
mail> Failed to connect POP Server.
mail> Failed to authenticate POP Server.
ftc1> Failed to connect server.
ftc1> Failed to log into server.
ftc1> Could not change directory.
ftc1> Could not change into binary mode.
ftc1> Could not change into passive mode.
ftc1> Could not change into active mode.
ftc1> Failed to send data.
ftc1> Communication time out.
ftc1> Invalid ID or password.
ftc1> Server not available.
ftc1> CWD error.
ftc1> Directory not found or no permissions.
ftc1> Server error on binary mode.
ftc1> Server error on passive mode.
ftc1> Server resource not available.
ftc2> Failed to connect server.
ftc2> Failed to log into server.
ftc2> Could not change directory.
ftc2> Could not change into binary mode.
ftc2> Could not change into passive mode.
ftc2> Could not change into active mode.
ftc2> Failed to send data.
ftc2> Communication time out.
ftc2> Invalid ID or password.
All settings are reset to configuration information at time of
shipment from factory.
Power of internal battery is low.
Capacity of SD memory card is full.
SD memory card has been formatted.
SD memory card has been mounted correctly.
Failed in SD memory card mounting.
SD memory card has been unmounted correctly.
Failed to unmount SD memory card.
SD memory card has been formatted correctly.
Failed in formatting SD memory card.
Error found in stream delivery request parameter.
Unclear client ID received in stream delivery request.
Invalid ID or password received in stream delivery request.
Stream delivery cannot be continued.
Failed in remote configuration by Camera Finder.
Failed in remote configuration by Camera Finder.
Failed in remote configuration by Camera Finder.
Failed in remote configuration by Camera Finder.
Failed in remote configuration by Camera Finder.
Failed in remote configuration by Camera Finder.
SMTP server cannot be found.
Failed to connect to the SMTP server.
POP server cannot be found.
Failed to connect to the POP server.
Failed in authentication with the POP server.
Failed to connect FTP server.
Failed to log in FTP server.
Could not move to specified directory.
Could not change to binary mode.
Could not change to passive mode.
Could not change to active mode.
Failed in JPEG data transfer.
Communication timeout between FTP server.
Specified ID or password is illegal.
Server cannot be used.
Directory moving (CWD) is prohibited by the server.
Specified directory is not existing or is write disabled.
Binary mode is prohibited by the server.
Passive mode is prohibited by the server.
Server does not have adequate vacant capacity.
Failed to connect FTP server.
Failed to log in FTP server.
Could not move to specified directory.
Could not change to binary mode.
Could not change to passive mode.
Could not change to active mode.
Failed in JPEG data transfer.
Communication timeout between FTP server.
Specified ID or password is illegal.
ID
Output message
Message
