13
12
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Be sure to use only the supplied AC adapter. Using a different AC adapter may
cause the camera to malfunction, heat up, or catch fire. Before using the AC
adapter, carefully read and observe the Important Safety Instructions (→page
7) and the notes below.
●
Do not allow the connectors on the AC adapter to come into contact with any
other metal object as this may result in short circuit.
●
To connect the AC adapter, firmly insert the plug end of the cable into the AC
adapter jack. Do not insert the plug into other jacks as this may cause a
malfunction.
●
When removing the connection cable, disconnect the cable by holding its plug.
Do not disconnect the cable by pulling on the cable.
●
Do not drop the AC adapter or subject it to strong impact.
●
Do not use the AC adapter in hot and humid places.
●
Do not use the supplied AC adapter with devices other than this camera.
●
Temperature increasing on the surface of the adapter is normal. Before moving
the adapter to another location, unplug it from the wall outlet, and wait until its
temperature decreases.
●
Buzzing noises may come from inside. This does not indicate malfunction.
●
Using the AC adapter near a radio, TV, or cellphone may cause interference.
Use the adapter at sufficient distances from these devices.
Specifications
AC adapter (ADPV16A)
Power source
: AC 100-240V 50/60Hz 35W
Rated output
: DC 12V, 2A
Ambient temperature guaranteed for performance
: 23
｡
F to 104
｡
F
Storage temperature
: 23
｡
F to 149
｡
F
Maximum external dimensions (inch) : 1.713 x 1.043 x 3.543 inch (Width x height x depth)
Cord length
: 47.244 inch
Length of DC extension cable : 118.11 inch
AC adapter
Precautions for Use
SD Memory Card
● There is a limit to the number of rewrites that is possible with the SD memory
card. Replacing the SD memory card when performing periodic maintenance
of the camera is recommended.
● The camera supports the following SD memory cards. Do not use memory
cards with other specifications.
SD memory card:
64, 128, 256, and 512 MB, 1 GB SD memory cards
(3.3 V) supported.
Physical interface:
Part 1. Physical Layer Specification; Version 1.01
● Images may not be recorded or read correctly if an unsupported SD memory
card is used with the camera.
● Carefully read the User's guide, precautions on use, and any other information
supplied with a purchased memory card.
● An SD memory card can be used for the loop recording of images. The life-
span (number of rewrites possible) of an SD memory card is greatly affected
by the capacity of the SD memory card. The use of a 128, 256, or 512 MB,
1 GB large-capacity SD memory card is recommended for loop recording.
● To achieve maximum performance of the camera, the use of a Toshiba SD
memory card is recommended. If a card of another company is used, the
recording intervals may lengthen and the erasure time during overwriting
may increase. As a result, the number of delivered frames of live video may
decrease.
● Do not use a memory card containing the data recorded by another device
with the camera as this may result in the camera not functioning correctly.
● Do not modify, overwrite the data, or change the folder name of an SD
memory card. It may result in the camera not to function correctly.
● Data recorded with the camera do not comply with the Exif image file format
or the DCF standard. Use a personal computer to view the SD memory card
if removed from the camera as other devices may not be capable of displaying
the images.
