101
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
100
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
D
Date and time setting ...................... 93
DC IN 12V Power plug input terminal .... 16
DDNS ...................................................... 86
(Dynamic Domain Name System)
This is the technique to overwrite
the information of DNS（Domain
Name System）server dynamically
and forward only different
informations between DNS servers.
Because of this, it enables to
reduce forwarding data which are
needed to renew information of
DNS server, and reduce overhead
of the network. When combined
with DHCP (Dynamic Host
Configuration Protocol), it is
possible to assign IP address and
host name right away as the host
on the LAN changes.
Default gateway ................................. 84
Network devices cannot
communicate directly with devices
in other networks. In this case,
communication becomes possible
by using devices like a router.
Default gateway is the IP address
of the router.
DHCP ...................................................... 23
(Dynamic Host Configuration
Protocol)
This is the protocol to assign IP
address dynamically to each client
on TCP/IP network. DHCP server
controls information of IP address,
gateway address, domain name
and subnet mask and can assign
these to client.
DNS ......................................................... 84
(Domain Name System)
Domain Name Systems translates
IP addresses into names making it
easier to manage hosts.
Download ............................................... 94
Taking and saving data from a device
in remote place by using network.
A
Accessories ............................................ 4
Administrator ....................................... 28
Administrator setup menu .............. 30
ALARM IN/OUT
（Alarm input/output）........................ 99
Alarm list ............................................... 44
Alarm setting ....................................... 71
Audio output ........................................ 16
Audio setting ....................................... 77
Auto B/W ............................................... 66
Auto Gain Control ............................... 67
Auto patrol ............................................ 38
A maximum of 64 preset camera
positions can be assigned. Camera
moves to those preset positions at
designated time interval.
B
Backlight Compensation ................. 68
Before calling service personnel 109
Brightness adjustment .................... 65
Browser .................................................. 32
Software to browse Web screens.
One example is Internet Explorer
TM
of Microsoft
Corporation.
C
Camera image screen ....................... 34
Camera searching application
"Camera Finder" ................................... 26
Camera name ....................................... 84
Changing password ........................... 90
Color difference gain ......................... 69
Connection ........................................... 24
Continuous Recording ...................... 50
Controller ............................................... 36
Crossover cable .................................. 24
One of the Ethernet cables made to
connect 2 PCs without using hub or router.
Glossary (Index)
■ Specifications of Alarm Signals
■ Example Circuit Connection
Name
Internal Circuit
Signal Condition
Alarm Input
Alarm Output
DC3.3V
3.3V
0V
100ms or more
3.3V
0V
100ms or more
Non-Voltage point signal, CMOS 3.3V-GND
signal inputs
Normal Opened
Normal Closed
Max. DC24V, 50mA
47kΩ
220Ω
Inside
the
Camera
To
CMOS input
To
CMOS
Output
220Ω
Inside
the
Camera
Alarm Terminals (Cont.)
Door Sensor
Network Camera
ALARM IN
ALARM OUT
GND
Light
Buzzer
etc...
AUDIO IN/OUT
Jack(3.5Φ)
MIC IN
AUDIO OUT
GND
