manualshive.com logo in svg

Toshiba GX9 ASD, Быстрый старт

Поделиться
Скачать
Toshiba GX9 ASD Скачать руководство пользователя страница 20

10

GX9 ASD Quick Start Guide

Operational and Maintenance 

Precautions

•

Turn off and lock-out/tag-out the main power, the control power, and instrumentation connections 
before inspecting or servicing the ASD, removing any enclosure panels, or connecting/
disconnecting the power wiring to the equipment.

•

If/when taking a live reading is required (equipment is powered), it is to be performed by 

Qualified 

Personnel

 

ONLY

. Proper and approved personal protection equipment is to be used by trained 

personnel for all electrical measurements.

•

The capacitors of the ASD maintain a residual charge for a period of time after the ASD is powered 
off. The required time for each ASD typeform is indicated with a cabinet label and a 

Charge 

Indicator LED

 (see 

Figure 3 on pg. 13

). Wait at least the minimum time indicated on the 

enclosure-mounted label and ensure that the 

Charge Indicator LED

 has turned off once the ASD 

power has been turned off before coming into contact with any circuits.

•

DO NOT

 attempt to disassemble, modify, or repair the ASD. Contact the Toshiba Customer 

Support Center for repair information.

•

DO NOT

 place any objects inside of the ASD.

•

If the ASD should emit smoke, or an unusual odor or sound, turn off the power immediately.

•

The heat sink and other components may become extremely hot to the touch. Allow the unit to cool 
before coming in contact with these items.

•

The 

Auto-Restart

 and 

Retry

 programmable functions of the ASD may allow for the system to 

start or stop unexpectedly. Warning signs to this effect must be clearly posted at or near the 
machinery/hazard.

•

Remove power from the ASD during extended periods of non-use.

•

Inspect the system annually (as a minimum) for damaged or improperly functioning parts, 
cleanliness, and to ensure that the connectors are tightened securely. Inspect more frequently when 
operating in a harsh environment or when used on a high-output-demand application.

DANGER

Содержание GX9 ASD





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды