Toshiba E-studio5530cPRO Скачать руководство пользователя страница 92

Страница: 92 / 324

• In Connect Copy mode, neither machine will enter Energy Saver modes (Low Power mode, or

Energy Saver mode).

System Auto Reset Timer

• Settings made on the main machine do not affect connect copy. Only sub-machines can be used

for interruption copying.

• When the System Reset time has lapsed, Interrupt mode on the sub-machine will be cancelled.

Copier / Document Server Auto Reset Timer

• Settings made on the main and sub-machines do not affect the connect copy.

Facsimile Auto Reset Timer

• Settings made on the main and sub-machines do not affect the connect copy.

Printer Auto Reset Timer

• Settings made on the main and sub-machines do not affect the connect copy.

Scanner Auto Reset Timer

• Settings made on the main and sub-machines do not affect the connect copy.

Set Date

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Set Time

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Auto Logout Timer

• Settings made on the main and sub-machines do not affect the connect copy.

Weekly Timer Code

• Settings made on the main and sub-machines do not affect the connect copy.

Weekly Timer: Monday - Sunday

• The main machine applies the setting that has been made on it. Sub-machine settings do not

affect connect copy.

• In Connect Copy mode, Weekly timer settings on the sub-machine will be disabled.

Administrator Tools

The following list describes how the default Administrator Tools settings on the main and sub-machines will
be applied during connect copy.

Address Book Management

• Settings made on the main and sub-machines do not affect the connect copy.

2. System Settings

Содержание E-studio5530cPRO





































































































































































































































































































































Результаты поиска

Содержание E-studio5530cPRO

Отзывы:

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 92 / 324

Результаты поиска

Содержание E-studio5530cPRO

Отзывы: