Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 54 / 324

• The machine also detects the paper type automatically if you specify the optional wide large
capacity tray (Wide LCT) for Type 2 and specify “Special Paper 2” as the paper type.
• The following paper types cannot be detected or may not be detected properly:
• Printed paper or copies
• Colored paper
• Preprinted paper
• Bent, folded, or creased paper
• Paper with holes
• Smudged, damaged, or torn paper
• Back of paper
• Batch of more than one paper type
• Sheets shorter than 160 mm (only if loaded in the bypass tray)
Double Feed Detect
You can specify whether or not the machine stops if more than one sheet of plain 1, plain 2, thin,
middle thick, thick 1, thick 2, thick 3, translucent paper, or OHP transparency has fed in at the same
time. If double feeds occur, the machine stops operating as if misfeed has occurred. Remove paper
from the tray and fan it thoroughly before resetting it in the tray.
• On
• Off
Trays that can be specified:
• Bypass Tray
• Tray 1
• Tray 2
• Tray 3
• LCT
• With certain paper types, double feeds cannot be detected.
• Depending on the paper type, the machine may detect double feeds even though they have not
actually occurred. In this case, specify “Off” for this setting.
• If you select duplex copying, the paper type of the backs of originals cannot be detected.
• [Double Feed Detect] works only if you select “No Display”, “Recycled Paper”, “Translucent
Paper”, or “OHP” in [Paper Type:] in System Settings.
• The machine also detects the paper type automatically if you specify the optional wide large
capacity tray (Wide LCT) for Type 2 and specify “Special Paper 2” as the paper type.
• The following paper types cannot be detected or may not be detected properly:
2. System Settings
52
2