Toshiba E-studio5530cPRO Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 324

Toshiba E-studio5530cPRO Скачать руководство пользователя страница 19

• For details about how to turn on the main power switch, see "Turning On the Power", About This

Machine.

• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.

Connecting to the USB Interface

This section describes how to connect the USB2.0 interface cable to the USB2.0 port.

• Properly shielded and grounded cables and connectors must be used for connections to a host

computer (and/or peripheral) in order to meet emission limits.

1.

Connect the USB2.0 interface cable to the USB2.0 port.

BAW014S

2.

Connect the other end to the USB2.0 port on the host computer.

• This machine does not come with a USB interface cable. Make sure you purchase the appropriate

cable for the machine and your computer.

• The USB2.0 interface board is supported by Windows Me / 2000 / XP, Windows Server 2003,

2008, Mac OS X 10.3.3 or higher.

• For Windows Me:

Make sure to install "USB Printing Support". When used with Windows Me, only a speed
equal to that of USB1.1 is possible.

• For Mac OS:

To use Macintosh, the machine must be equipped with the optional PostScript 3 unit. When
used with Mac OS X 10.3.3 or higher, a transfer speed of USB2.0 is supported.

• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.

Connecting to the Interfaces

17

1

«
...
17
18
19
20
21
...
»

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов