Toshiba E-studio5530cPRO Скачать руководство пользователя страница 90

Страница: 90 / 324

Paper Tray Priority: Copier

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Paper Tray Priority: Facsimile

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Paper Tray Priority: Printer

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Printer Bypass Paper Size

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Tray Paper Size: Tray 2 - 3

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

• Both the main and sub-machines should have the same paper tray settings. Only paper trays

with the same size, orientation and paper type can be used in Connect Copy mode.

Tray paper Size: LCT

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

• Both the main and sub-machines should have the same paper tray settings. Only paper trays

with the same size, orientation and paper type can be used in Connect Copy mode.

Tray Paper Size: Interposer Upper Tray

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Tray Paper Size: Interposer Lower Tray

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

Paper Type: Bypass tray

• The bypass tray can only be used with the Covers and Chapter functions.

Paper Type: Tray 2 - 3

• The main machine applies the setting that has been made on it. Sub-machines also apply their

own respective settings.

• Paper size, orientation, and type settings that match those currently made on both the main and

sub-machines can be used for connect copy. To get the most from the connect copy function,
we recommend you make the same paper settings on both the main and sub-machines.

2. System Settings

Содержание E-studio5530cPRO





































































































































































































































































































































Результаты поиска

Содержание E-studio5530cPRO

Отзывы:

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 90 / 324

Результаты поиска

Содержание E-studio5530cPRO

Отзывы: