manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 259 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 259

• p.231 "Registering a User Code"
• p.278 "Registering Names to a Group"

Changing an E-mail Destination

This section describes how to change an e-mail destination.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose e-mail address you want to change.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [E-mail].

7.

Press [Change] under "E-mail Address".

8.

Enter the e-mail address, and then press [OK].

9.

Press [OK].

E-mail Destination

257

7

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов