manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 61 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 61

The default setting is Auto Select.

SMB Computer Name

Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.

SMB Work Group

Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.

Ethernet Speed

Set the access speed for networks.
The default setting is Auto Select.
Select a speed that matches your network environment. [Auto Select] should usually be selected.

10Mbps Half
Duplex

10Mbps Full
Duplex

100Mbps
Half Duplex

100Mbps Full
Duplex

Auto Select

10Mbps Half
Duplex

10Mbps Full
Duplex

100Mbps
Half Duplex

100Mbps Full
Duplex

Auto Select

Ping Command

Check the network connection with ping command using given IPv4 address.
If you fail to connect to the network, check the following, and then retry the ping command.

• Make sure that "IPv4" in [Effective Protocol] is set to "Active".
• Check that the machine with assigned IPv4 address is connected to the network.

Interface Settings

59

2

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов