manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 151 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 151

SMTP Reception File Delivery Settings

This section describes the SMTP Reception File Delivery Settings menu under Facsimile Features.
When an authorized e-mail address is set, e-mail received from addresses that do not match the authorized
address is discarded, and an error message is returned to the SMTP server.
The authorized e-mail address is compared with the addresses of e-mail originators, as illustrated by the
following examples.

• When the authorized e-mail address is set to "@aaa.abcd.com":

[email protected] - accepted
[email protected] - not accepted
[email protected] - not accepted

No Error Report is output even when e-mail is discarded.
This function is available on systems that allow routing of e-mail received via SMTP.

1.

Press [Facsimile Features].

2.

Press [Reception Settings].

3.

Press [SMTP RX File Delivery Settings].

4.

Press [On].

5.

Press [Change].

SMTP Reception File Delivery Settings

149

4

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов