manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 77 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 77

• Search Conditions
• Authentication

This function supports LDAP Version 2.0 and 3.0.
To use the LDAP server, select [On] under LDAP Search.
For details about how to program the LDAP Server, see "Programming the LDAP server".

LDAP Search

Specify whether or not to use the LDAP server for searching.
The default setting is Off.
If you select [Off], LDAP server list will not appear on the searching display.

AOF (Always On)

Specify whether or not to use Auto Off.
The default setting is On.

Program / Change / Delete Realm

Program the realm to be used for Kerberos authentication.

• Realm Name
• KDC Server Name
• Domain Name

Be sure to set both the realm name and KDC server name when programming a realm.
For details about Program / Change / Delete Realm, see "Programming the Realm".

Firmware Version

You can check the version of the software installed in this machine.

Network Security Level

For details about this function, consult your administrator.

Auto Erase Memory Setting

For details about this function, consult your administrator.

Erase All Memory

For details about this function, consult your administrator.

Transfer Log Setting

This function is not available with this machine. For details about this function, consult your
administrator.

Print Backup: Delete All Files

To delete a print backup document, press [Yes].

Administrator Tools

75

2

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов