manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 219 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 219

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner Features.
Default settings are shown in bold type.

A.C.S. Sensitivity Level

Sets the sensitivity level for judging color/black and white for scanning originals when [Scan Type]
is set to [Auto Color Select].
The default setting is level 2 of 5 adjustment levels.

Wait Time for Next Orig.: Exposure Glass

To divide originals and scan them individually with the exposure glass to form a single file, select
[Continuous Wait], [Off], or [Set Wait Time] for the waiting status.
The default setting is Set Wait Time, 60 second (s).
If you select [SADF] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next
Orig.: Exposure Glass] setting becomes invalid.
If you select [Batch] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next
Orig.: Exposure Glass] setting becomes invalid, and the machine waits for an additional original to
be placed.
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start if additional originals are placed and the [Start] key is pressed
within this time. You can end scanning and begin transmission by pressing the [ ] key within this time.
Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals until the [ ] key is
pressed. Scanning will start when additional originals are placed and the [Start] key is pressed. You
can end scanning and begin sending by pressing the [ ] key.
If originals are placed in the ADF (auto document feeder), transmission will start without waiting for
additional originals after all originals in the ADF have been scanned, regardless of the specified
settings.
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.

• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the [Interrupt] key to activate the copy mode

Wait Time for Next Original(s): SADF

When dividing originals and scanning them separately with the ADF to form a single file, select [Set
Wait Time] or [Continuous Wait] for the waiting status.
The default setting is Set Wait Time, 60 second (s).

Scan Settings

217

6

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов