manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 271 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 271

• p.227 "Registering Names"
• p.62 "File Transfer"

Changing an FTP Folder

This section describes how to change the registered FTP folder.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose folder you want to change.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [Folder].

7.

Select the items you want to change.

8.

Press [Connection Test] to check the path is set correctly.

9.

Press [Exit].

10.

Press [OK].

11.

Press [Exit].

12.

Press the [User Tools/Counter] key.

• To change the name, key display and title, see "Changing a Registered Name".

• p.228 "Changing a Registered Name"

Registering Folders

269

7

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов