manualshive.com logo in svg

Toshiba E-studio5530cPRO, Руководство по эксплуатации, Страница: 218 / 324

Поделиться
Скачать
Toshiba E-studio5530cPRO Скачать руководство пользователя страница 218

• On

The transmission journal is printed automatically. The printed journal is deleted.

• Off

Transmission results are deleted one by one as new results are stored.

• Do not Print: Disable Send

Transmission cannot be performed when the journal is full.
When printed, all records are deleted after printing. When not printed, records over the limit
are automatically deleted in succession from the oldest record.
While the journal is being printed, files with the status waiting cannot be sent.

Print Scanner Journal

The scanner journal is printed and deleted.

Delete Scanner Journal

The scanner journal is deleted without being printed.

• p.12 "Accessing User Tools"
• p.62 "File Transfer"
• p.68 "Administrator Tools"

6. Scanner Features

216

6

Содержание E-studio5530cPRO





































































































































































































































































































































Отзывы:

Нет отзывов