Toshiba Density (Consistency) Meter LQ500, Руководство по эксплуатации

Страница: 23 / 113


21

6 F 8 A 0 5 2 1
3.4 Precautions for wiring
WARNING
DO
■
Be sure to install a fuse and a
switch to disconnect the
equipment from the power
source.
Failure to observe this can cause
electric shock or equipment failure.
DO
■
Be sure to ground the
equipment using a grounding
wire separate from those used
for power tools.
(Grounding resistance: 100
Ω
or
less)
Without grounding, electric shock,
malfunction, or equipment failure
can be caused by electric
leakage.
DO
■
Make sure that the main
power line is off before wiring or
cabling.
Wiring or cabling without switching
off the main power line can cause
electric shock.
DO
■
Use crimp terminals with
insulation sleeves for power
line and grounding wire
terminals.
A disconnected cable or wire from
the terminal or a loose terminal
can cause electric shock or
generate heat and cause a fire or
equipment failure.
DO
■
Wiring and cabling should be
done as shown in the wiring and
connection diagrams.
Wrong wiring or cabling can cause
malfunctions, overheating, sparking,
or electric shock.
DON’T
■
Do not wire or cable with wet
hands.
A wet hand can cause electric
shock.
The label shown left appears near a terminal block on
the equipment to which power is supplied. Take
precautions to avoid electric shock.
Yellow
Yellow
Yellow