Toshiba BMS-TP0640ACE, Руководство пользователя

Страница: 74 / 104

74
CAUTION
In case to decide address (Line / Group / Indoor address) by automatic address setup, be sure to
change these address to match the address setting table for TCS-NET control system.
→ →
→ →
→
“4-3-1 (2) Manual setting from wired remote controllr”,
→ →
→ →
→
“4-3-1 (13) Address change from remote controller”
If unmatched address is allocated, a problem such as error of communication with air conditioner
will occur.
4-3-1 (10) Automatic address setting (for reference)
Setting flow
Line addrss setting
Contents Reference No.
Power - ON
Automatic address setting
Line address settting
Check at Power-ON
Refer to this section “4-3-1 (10)
Trial operation
Manual setting from remote controller
Address change from remote
controller
4-3-1
Trial operation
Manual address setting
or
Address change from remote controller
Setup of relay connector and SW30-2
Central control device setting
Central controller exist ?
Trial operation (Central control device)
TCS-NET control system address setting
Intelligent server
TCS-NET relay I/F
Energy monitoring I/F
Digital I/O relay I/F
Setup of relay connector and
terminator
Central control address setting
Test run for central controller
Address setting for TCS-NET control
system
4-3-1
4-3-1 (6)
4-3-1 (2)
4-3-1 (13)
4-3-1 (7)
4-3-1 (8)
4-3-1 (9)
4-4
Address setup flow (In case automatic address setup)
Chapter. 5
Trial operation for Touch panel controller