No. 2B771-004EN*M
2-3
2.4 Preventing Electric Shocks, Fires, and Power Supply
Interruptions
Observe the following safety precautions to prevent electric shocks, fires, and power
supply interruptions.
DANGER:
Never use flammable or explosive gases near this system.
Also do not use the system with oxygen or in an oxygen-
enriched atmosphere. Doing so may result in an explosion
(the system is not explosion-proof).
WARNING:
1. Follow the instructions below regarding the power cable
and plug.
Insert the power plug only into a 3-pin (with protective
grounding) medical electrical outlet.
Do not connect the power cable to a 2-pin outlet using
an adapter.
Do not forcibly bend the cable.
Do not modify the power cable or plug.
Do not damage the power cable or plug.
Do not twist the power cable or plug.
Do not bundle the power cable or plug.
Do not place heavy objects on the power cable or plug.
Do not pinch the power cable or plug.
Do not subject the power cable or plug to impact.
Do not pull the power cable to disconnect the plug
from the outlet.
2. If any abnormalities (such as damage or wear) are found
on the power cable or plug, the power cable and plug
must be replaced. Stop using it immediately and contact
your Toshiba service representative. Continuing to use
the system may result in electric shock, fire, or
interruption of power supply.
3. Do not use the system if the connection to the outlet is
loose.
4. If an abnormal smell or noise, or smoke occurs,
immediately turn the main power switch on the power
panel OFF and disconnect the plug from the power outlet.
Continuing to use the system with such an abnormality
may result in a fire etc. When using the system, ensure
that there is enough space for access to the main power
switch.
5. Do not allow this system or other equipment to come into
contact with the patient. If this system or other
equipment is defective, the patient may receive an electric
shock.
Содержание Aplio 500 TUS-A500
