Toshiba Aplio 500 TUS-A500, Руководство по эксплуатации

Страница: 109 / 232

No. 2B771-004EN*M
14-3
NOTE: and
is pressed to return to 2D single display mode directly from another
imaging or display mode. Even if the image is frozen, when this switch is
pressed, the image is unfrozen and displayed in 2D single display mode.
is pressed to return to single display mode from dual display mode,
update display mode, or full display mode.
Adjusting the depth
Clockwise : Shallower
Counterclockwise : Deeper
* When the [ZOOM] LED is lit, press the dial to light the
[DEPTH] LED.
Image zooming/panning/movement (PAN/ZOOM)
Press this dial to set zoom mode (the [Zoom] LED lights). Image
zooming and panning becomes possible.
The image zooming method can be selected using the [Zoom
Method] switch in the [OTHER] menu (refer to subsection
14.1.4).
Changing the frequency
Use the [Freq.] knob to change the frequency.
The current frequency is shown on the image.
Changing the focus
Use the [Focus] knob to change the focal position (the focus
mark is changed from [ ] to [ ] and [Auto Focus] is turned
OFF).

The focal position set using this switch is maintained even
when the depth is changed after the focal position is changed.

When the focal position is outside the depth, it is reset to the
initial position [Auto Focus] ON.