Toshiba Aplio 500 TUS-A500, Руководство по эксплуатации

Страница: 215 / 232

No. 2B771-004EN*M
25-2
Guidance and manufacturer's declaration - electromagnetic immunity
This system is intended for use in the electromagnetic environment specified below. The
customer or the user of this system should assure that it is used in such an environment.
Immunity test IEC 60601 test level Compliance level
Electromagnetic
environment - guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2 ±6 kV contact
±8 kV air ±6 kV contact
±8 kV air Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the relative
humidity should be at least
30%.
Electrical fast
transient/burst
IEC 61000-4-4 ±2 kV for power
supply lines
±1 kV for input/output
lines ±2 kV for power
supply lines
±1 kV for input/output
lines Mains power quality should be
that of a typical commercial or
hospital environment.
Surge
IEC 61000-4-5 ±1 kV differential
mode
±2 kV common mode ±1 kV differential
mode
±2 kV common mode Mains power quality should be
that of a typical commercial or
hospital environment.
Voltage dips,
short interruptions
and voltage
variations on
power supply
input lines
IEC 61000-4-11 <5 % U T
(>95 % dip in U T)
for 0,5 cycle
40 %
U T
(60 % dip in U T)
for 5 cycles
70 %
U T
(30 % dip in U T)
for 25 cycles
<5 %
U T
(>95 % dip in U T)
for 5 s
<5 % U T
(>95 % dip in U T)
for 0.5 cycle
40 %
U T
(60 % dip in U T)
for 5 cycles
70 %
U T
(30 % dip in U T)
for 25 cycles
<5 %
U T
(>95 % dip in U T)
for 5 s
Mains power quality should be
that of a typical commercial or
hospital environment. If the
user of this system requires
continued operation during
power mains interruptions, it is
recommended for this system
to be powered from an
uninterruptible power supply.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8 3 A/m 3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical commercial
or hospital environment.
NOTE 1: U T is the a.c. mains voltage prior to application of the test level.
NOTE 2: Do not use cables or parts other than those intended for this product.
If cables or parts other than those intended for this product are used, performance
related to electromagnetic immunity may deteriorate.