Toshiba Aplio 500 TUS-A500, Руководство по эксплуатации

Страница: 169 / 232

No. 2B771-004EN*M
19-3
19.2.1 Operations using the touch panel
The figure below shows the touch panel menu used for storing a dynamic image.
No. Switch Function
<1> The storage destination can be selected.
[HDD] : Hard disk
[OPTICAL] : CD/DVD
*
(DICOM cache)
[USB] : USB flash drive
*
[Server] : DICOM server
*
<2> This knob is used to specify the number of preceding cardiac
cycles for an image that is stored when
[CLIPS STORE] is
pressed.
<3> The method for specifying the image storing range can be
toggled between R-R (number of cardiac cycles) and Time
(seconds).
<4> This knob is used to specify the number of preceding seconds
for an image that is stored when
[CLIPS STORE] is pressed.
<5> The image acquisition frame rate can be selected.
Frame rates of 60 Hz, 30 Hz, and 15 Hz can be selected.
<6> The specified dynamic image is stored together with the raw
data.
Dynamic images with raw data are used for analysis by the
optional TCA and Wall Motion Tracking functions.
<7> The Snapshot Clips mode can be set to [Retro] or [Pro] .
<8> The image storage type can be set as [Snapshot] or [Cine] .
* When optical media or a server is selected as the destination, the same images are
also stored in the HDD.